Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole usin

Size: px

Start display at page:

Download "Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole usin"

진성 영
6 years ago
Views:

1 Adjustable Wall Mount User Guide WMN4270S Finished wall mount Components Please make sure to use the components and parts supplied with the product. Adjustable mount Bracket Parts Screws c: 4 EA M8X35 M8X40 M8X47 Washers Plastic hangers : 4 EA 1 EA Left: 1 EA Right: 1 EA Screws a: 8 EA Anchors: 8 EA Screws b: 8 EA Cable tie: 1 EA Safety precautions Make sure that an installation engineer specified by your dealer installs the product. Make sure that an installation engineer specified by your dealer moves or replaces the product after the installation. Do not hang onto the installed product and avoid impacts to the product. 1. Do not let children play underneath the product when it is installed. Children may hit their heads against the edge of the product. 2. Take care when you adjust the angle or rotate the product because the back of the product may make contact with the wall. (You can prevent damage to the product and the wall by attaching sponges to the 4 edges of the product.) 3. Do not install the product in a hot, humid location or on a weak wall that is unable to sustain the weight of the product. 4. Do not insert your hand into the groove at the bottom of the TV while installing the TV onto the wall mount as this may result in an electric shock. 5. Make sure to cover the groove at the bottom of the TV that becomes visible after removing the stand using the separate cover supplied with the TV. Wall Mount Guide-WMN4270S-03.indb :11:16

2 Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using a 6X50 drill bit. Clean the inside of the hole. Insert the enclosed anchor into the hole. Align the adjustable mount with the hole and fasten the screw a. 6 7 Fix the adjustable mount onto the wall with anchors and screws a from 1 to 7 in this order. If you cannot fasten the anchors and screws at the specified positions, fasten them at the nearest possible positions. When you drill a hole in the wall, make sure to use a drill bit with the specified diameter. failing to do so may result in a safety issue. Check the strength of the wall, and if the wall is insufficiently strong, reinforce the wall before installing the product on the wall. The screws and anchors supplied with the product are to fix the product onto wood or concrete. Check the material of the wall and use appropriate fixing screws depending on the type of material such as plaster board, marble or iron plate. 2 After firmly fixing the adjustable mount onto the wall as shown by the figure, pull the adjustable part forward, assemble the brackets with the adjustable mount as shown by the figure and fix them by fastening the 8 screws b supplied with the product. (The same for left and right) 4 screws b 4 screws b Wall Mount Guide-WMN4270S-03.indb :11:17

3 3 Remove the screws from the main body of the TV, assemble the 4 enclosed plastic hangers and screws c as shown by the figure and firmly fasten them to the back of the main body of the TV. [Models before 2013] [2013 F-series models] Refer to the separate sheet Use M8X35 and M8X40 screws c Hang the TV onto the wall mount and make sure to check if the TV has been installed properly onto the wall mount by observing the assembled TV as you move the wall mount from left to right. Take care not to hurt your fingers when you install the TV or adjust the wall mount. Make sure to fix the wall mount onto the wall firmly. If the TV falls, it may result in injury or damage to the product. 4 Pull the wall mount brackets as far forward as possible and hang the TV onto the wall mount at the specified positions as shown by the figure while 2 persons are holding the TV. Fix the TV onto the wall mount firmly and turn the 2 safety catches at the top of the wall mount brackets to the lock position as shown by the figure, so that the TV and the wall mount do not become separated. [For normal models] [For slim models] 5 Tie the power cord and the other cables with the enclosed cable tie as shown by the figure and make sure that the cables do not come loose when the wall mount is adjusted. After connecting the cables and pulling the adjustable mount as far forward as possible, arrange the cables using the cable tie that has been passed through the specified hole in the adjustable mount as shown by the figure. The cable will then not interfere with the wall mount. Check the operation 2 or 3 times and if there is no problem, fix the wall molding. Wall Mount Guide-WMN4270S-03.indb :11:18

4 Adjusting the wall mount angle This product has adopted a Smooth Moving Mechanism so that it always moves very smoothly. Adjust the angle of the product carefully. Using excessive force may result in the product hitting the wall and becoming damaged. Adjust the horizontal angle by holding both sides of the product. When you adjust the vertical angle, hold the top center of the product. Then you can smoothly adjust the angle. You can adjust the angle up to -20 ~ 20 horizontally and up to 10 ~ 15 vertically. The allowed adjustable angle may differ depending on the model. Product specifications Specifications Width (mm) 465 Height (mm) 460 Depth (mm) 24.5 Weight (Kg) 5.5 Wall mount VESA specifications 400 X 400 The product appearance and specifications are subject to change for product improvement purposes without prior notice. Wall Mount Guide-WMN4270S-03.indb :11:19

5 각도조절및회전형벽걸이지지대사용설명서 WMN4270S 벽걸이완제품 구성품 벽걸이설치시반드시제공되는구성품및부품을사용하여주세요. 각도조절장치 브라켓 부속품 나사 c : 4 개 M8X35 M8X40 M8X47 와셔 걸이용플라스틱 : 4 개 1 개왼쪽 : 1 개오른쪽 : 1 개 나사 a : 8 개 앵커 : 8 개 나사 b : 8 개 와이어고정부품 : 1 개 안전을위한주의사항 제품설치는반드시판매점에서지정한전문설치업자에게의뢰해주세요. 설치후제품을이동하거나교체시에는반드시 판매점에서지정한전문설치업자에게문의하세요. 설치후매달리거나심한충격을주지마세요. 1. 제품아래에서아이가놀지못하게하세요. 모서리에머리가부딪칠수있습니다. 2. 각도조절을하거나회전시에제품의뒷면이벽과부딪칠수있으니주의하세요. ( 모서리 4곳에스폰지등을부착하면벽과제품이상하는것을방지할수있습니다.) 3. 고온다습한곳이나제품의무게를견디지못하는벽에는설치하지마세요. 4. 감전의위험이있으므로벽걸이설치중에 TV 제품하단의스탠드분리홈에절대손을넣지마세요. 5. TV 제품의스탠드가분리된홈은 TV 제품에있는별도의덮개를반드시막고벽걸이설치작업을완료하여주세요. Wall Mount Guide-WMN4270S-03.indb :11:20

6 벽걸이설치방법 1 각도조절장치를그림과같이벽면에고정하십시오 앵커및나사 a 고정방법 6X50 의드릴로구멍을뚫으세요. 뚫은구멍을청소하세요. 구멍에동봉된앵커를삽입하세요. 각도조절장치를구멍에맞추어 나사 a 를체결하세요. 6 7 각도조절장치를앵커와나사a 로그림과같이 1번에서 7번까지순서대로고정시키세요. 불가피하게지정된위치에고정하지못할경우에는가장인접한곳으로이동하여고정하세요. 벽에구멍을뚫을때에는반드시지정된직경의드릴 비트및드릴을사용하세요. 지정되지않은방법으로 설치할경우에는안전상의문제가발생될수있습니다. 벽의강도를확인한후에강도가충분하지못한곳은반드시적절한보강작업을한뒤에설치하세요. 동봉된나사와앵커는목재와콘크리트체결용입니다. 벽을확인하여석고보드, 대리석, 철판등에는적절한전용체결나사를사용하세요. 2 그림과같이벽면에본체를단단히고정시킨후에전면으로당겨서펼쳐진브라켓을각도조절장치의지정한위치에 삽입하여동봉된나사 b 8 개를이용하여고정하십시오. ( 좌 / 우동일 ) 나사 b 4 개 나사 b 4 개 Wall Mount Guide-WMN4270S-03.indb :11:21

7 3 TV 본체의나사를제거한후에, 동봉된걸이용플라스틱과나사 c 4 개를그림과같이결합하여 TV 본체뒷면에단단하게조여주세요. [13 년도이전모델 ] [13 년도 F-Series 모델 ] 별지참조 M8X35, M8X40 나사 c 사용 본체를벽걸이에걸은후에모두정확하게걸렸는지좌, 우측면에서필히확인하세요. 설치및각도조절시손가락이끼일수있으니조심하세요. 벽걸이브라켓이벽에단단하게고정되어있지않으면본체가떨어져다칠수있으니단단하게고정하세요. 4 그림과같이벽걸이의브라켓고정부를전면으로최대한당긴후에 TV 본체를반드시두사람이들고벽걸이의지정부위에걸어주십시오. 벽걸이에 TV 본체를완전히고정한후에벽걸이양쪽상부 2개소의안전고리를그림과같이회전하여고정되도록하십시오. [ 일반사용시 ] [ 슬림사용시 ] 5 전원선및기타주변기기연결선의처리는동봉된와이어고정부품을사용하여그림과같이묶은후에회전및작동시에이탈되거나빠지지않는지확인해 주시길바랍니다. 케이블을삽입한후에각도조절장치를전면으로최대한당긴후에와이어를 그림과같이각도조절기의지정한구멍을이용하여정형하게되면회전시에 연결선과간섭되지않습니다. 2 ~ 3 회동안동작확인후, 이상이없을시에는벽면몰딩을고정바랍니다. Wall Mount Guide-WMN4270S-03.indb :11:22

8 벽걸이각도조절방법 본제품은소비자의편리성을위해 SMOOTH MOVING MECHANISM 을도입하여아주부드럽게움직이도록 설계되어있습니다. 제품의각도를조정할때너무강한힘을주면제품이벽면과 부딪쳐손상을입을수있으니주의하세요. 좌우각도를조정할때에는제품의양옆부분을잡아주고, 아래각도를조정할때에는제품윗면의가운데를잡으면 부드럽게원하는각도로조절할수있습니다. 각도조절은좌 / 우방향으로 -20 ~ 20 까지, 아래방향으로 10 ~ 15 까지임의로조절할수있습니다. 모델에따라 각도조절장치의각도가상이할수있습니다. 제품사양 제품규격 폭 (mm) 465 높이 (mm) 460 깊이 (mm) 24.5 무게 (Kg) 5.5 벽걸이 VESA 규격 400 X 400 제품의외관이나사양등은제품의개량을위해서, 사전에예고없이변경될수있습니다. Wall Mount Guide-WMN4270S-03.indb :11:23

Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using

Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using Adjustable 각도조절및회전형 Wall 벽걸이 Mount 지지대 User 사용설명서 Guide WMN4070S WMN4270S Finished wall mount Components Please make sure to use the components and parts supplied with the product. Adjustable mount Parts