목차 안전을위한주의사항... 3 시작하기... 5 구성품... 5 각부분의명칭및기능... 6 케이블및커넥터... 8 올바른얼굴등록및인증방법... 9 얼굴등록시주의사항... 9 얼굴인증시주의사항... 9 설치 브래킷및제품고정 전원연결 네트

FaceStation 2 설치 가이드 버전 1.20 한국어 KO 101.00.FS2 V1.20A

목차 안전을위한주의사항... 3 시작하기... 5 구성품... 5 각부분의명칭및기능... 6 케이블및커넥터... 8 올바른얼굴등록및인증방법... 9 얼굴등록시주의사항... 9 얼굴인증시주의사항... 9 설치... 10 브래킷및제품고정... 10 전원연결... 12 네트워크연결... 13 TCP/IP... 13 TTL 입력연결... 14 릴레이연결... 15 Fail Safe Lock... 15 Fail Secure Lock... 15 자동문연결... 16 독립형연결... 17 Secure I/O 2 연결... 18 Wiegand 연결... 19 제품사양... 20 제품치수... 21 FCC 준수정보... 22 유럽연합적합성선언 (CE)... 22 부록... 23 면책조항... 23 저작권공지... 23 오픈소스라이선스... 23 GNU General Public License... 23 OpenSSL License... 29 Original SSLeay License... 29

안전을위한주의사항 안전을위한주의사항 제품을올바르게사용하여위험이나재산상의피해를미리막기위한내용이므로반드시지켜주시기바랍니다. 경고 지시사항을위반하여심각한상해나사망에이를수있습니다. 설치관련직사광선, 습기, 먼지나그을음이많은곳에는설치하지마십시오. 화재또는감전의원인이됩니다. 전열기등으로인해열이발생하는곳에는설치하지마십시오. 과열로인한화재또는감전의원인이됩니다. 물기가없는장소에설치하십시오. 습기로인한제품손상및감전의원인이됩니다. 전자파장해가없는곳에설치하십시오. 제품손상또는감전의원인이됩니다. 사용자가임의로제품을설치하거나수리하지마십시오. 화재, 감전, 부상의원인이됩니다. 사용자의임의설치나수리로인해제품이손상된경우에는무상서비스를받을수없습니다. 사용관련 제품내부에물, 음료수, 약품등의액체가들어가지않도록주의하십시오. 감전, 화재, 제품손상의원인이됩니다. 주의 지시사항을위반하여경미한상해나제품손상이발생할수있습니다. 설치관련전원케이블등을통행장소에방치하지마십시오. 제품파손또는신체상해의원인이됩니다. 자석, TV, ( 특히 CRT) 모니터, 스피커등자성이강한물체주변에설치하지마십시오. 고장의원인이됩니다. 직류 24V, 2.5 A 이상의전원어댑터만사용하십시오. 적합한전원을사용하지않을때에는장치가정상적으로작동하지않습니다. Secure I/O 2, 전기정 ( 전기식잠금장치 ), FaceStation 2는반드시개별전원을사용하십시오. 전원을함께연결하여사용하면장치가오작동할수있습니다. 여러대의장치를설치할때최소이격거리를확인하십시오. 그렇지않으면다른장치의 RF 성능에영향을주어장치가오작동할수있습니다. 3

안전을위한주의사항 사용관련제품을떨어뜨리거나충격을주지마십시오. 고장의원인이됩니다. 암호를타인이알지못하도록주의하여관리하고, 주기적으로변경하여주십시오. 불법침입의원인이됩니다. 제품의버튼을무리하게누르거나날카로운도구를사용해누르지마십시오. 고장의원인이됩니다. 제품청소시물, 벤젠, 알코올등이아닌부드러운마른천으로닦아주십시오. 제품고장의원인이됩니다. FaceStation 2는정전식화면을사용합니다. 비오는날씨와같이습기가많거나제품표면에물이많이묻은경우마른천으로닦은뒤사용하십시오. RTC 배터리 잘못된종류의배터리로교체하면폭발의위험이있습니다. 배터리는거주지역또는국제폐기물규정에따라폐기하십시오. 4

시작하기 시작하기 구성품 PVC 앵커 (4 개 ) FaceStation 2 벽걸이용브래킷 다이오드 (1 개 ) 연결케이블 (2 핀 1 개, 3 핀 1 개, 4 핀 4 개 ) 페라이트코어 (1 개 ) 고정용나사 (4 개 ) 120Ω 저항 (1 개 ) 드릴링템플릿 퀵가이드 알아두기 구성품은설치환경에따라달라질수있습니다. 5

시작하기 각부분의명칭및기능 마이크 RF 카드인식부 LCD 화면 IR 카메라 카메라 TTL 입력 (4 핀 ) RS-485 (4 핀 ) 릴레이 (3 핀 ) 전원 (2 핀 ) Wiegand 출력 (4 핀 ) Wiegand 입력 (4 핀 ) 이더넷 스피커 USB 메모리슬롯 미니 USB 케이블슬롯 명칭 기능설명 마이크인터폰이연결되었을때사용자의음성을전달합니다. LCD 화면 동작을위한 UI를제공합니다. IR 카메라 IR 이미지를촬영합니다. 카메라 실제이미지를촬영합니다. RF 카드인식부 출입을위해카드를인식시키는부분입니다. 스피커 소리를들을수있습니다. USB 메모리슬롯 USB 메모리를연결합니다. 미니 USB 케이블슬롯 추후지원예정. TTL 입력 (4핀) TTL 입력케이블을연결합니다. RS-485 (4핀) RS-485 케이블을연결합니다. 릴레이 (3핀) 릴레이케이블을연결합니다. 6

시작하기 전원 (2핀) 전원케이블을연결합니다. 이더넷 이더넷케이블을연결합니다. Wiegand 입력 (4핀) Wiegand 입력케이블을연결합니다. Wiegand 출력 (4핀) Wiegand 출력케이블을연결합니다. 7

시작하기 케이블및커넥터 전원 핀명칭색상 1 PWR +VDC 빨간색 ( 흰띠 ) 2 PWR GND 검은색 ( 흰띠 ) 릴레이 핀 명칭 색상 1 RLY NO 흰색 2 RLY COM 파란색 3 RLY NC 주황색 RS-485 핀 명칭 색상 1 485 TRXP 파란색 2 485 TRXN 노란색 3 485 GND 검정색 4 SH GND 회색 TTL 입력 핀 명칭 색상 1 TTL IN0 빨간색 2 TTL IN1 노란색 3 TTL GND 검정색 4 SH GND 회색 Wiegand 입출력 핀 명칭 색상 1 WG D0 초록색 2 WG D1 흰색 3 WG GND 검정색 8

시작하기 4 SH GND 회색 올바른얼굴등록및인증방법 얼굴등록시주의사항 얼굴을등록할때장치와얼굴의거리를 40 ~ 80 cm로유지하십시오. 표정이변하지않도록주의하십시오. ( 웃는얼굴, 찡그린얼굴, 윙크등 ) 화면의지시에따르지않을경우얼굴등록이오래걸리거나실패할수있습니다. 눈이나눈썹이가려지지않도록주의하십시오. 모자, 마스크, 선글라스, 안대를착용하지마십시오. 두명의얼굴이화면에동시에나타나지않도록주의하십시오. 한번에한사람씩등록하십시오. 안경을착용한사용자는안경착용전 / 후얼굴을모두등록할것을권장합니다. 얼굴인증시주의사항 장치의화면에표시된안내선안에얼굴이나타나도록하십시오. 착용하던안경을바꾼경우인증에실패할수있습니다. 안경을착용하지않은얼굴을등록한경우안경을벗고얼굴을인증하십시오. 안경을착용한얼굴만등록한경우기존에착용하던안경으로바꿔서인증을다시시도하십시오. 모자, 마스크, 선글라스, 안대등으로얼굴의일부를가릴경우인증에실패할수있습니다. 눈썹과얼굴을모두장치가인식할수있도록얼굴을가리지마십시오. 9

설치 설치 브래킷및제품고정 1 제공된드릴링템플릿을이용하여제품을장착할위치를정하십시오. 비주얼카메라각도 NIR 카메라각도 알아두기 장치를설치할최적의높이는 110 cm입니다. 장치에직사광선이닿지않는곳에설치하십시오. 사용자가얼굴을인증할때얼굴에직사광선이닿지않도록설치위치를조정하십시오. 2 FaceStation 2 를장착할위치에브래킷고정용나사를이용하여브래킷을단단히고정하십시오. 알아두기 FaceStation 2 를콘크리트벽에설치할경우드릴로구멍을뚫어 PVC 앵커를끼운뒤고정용나사로고정하십시오. RF 신호간섭을피하기위해최소이격거리를확인하여설치하십시오. 10

설치 벽 벽두께 벽 300 mm 거리 벽두께 거리 100 mm 283 mm 120 mm 275 mm 150 mm 260 mm 3 고정된브래킷위에 FaceStation 2 를장착하십시오. 벽 4 FaceStation 2 의제품고정용나사를돌려 FaceStation 2 와브래킷을조립하십시오. 벽 11

설치 전원연결 UPS ( 옵션 ) DC 전원 1 - PWR +VDC 빨간색 ( 흰띠 ) 2 - PWR GND 검은색 ( 흰띠 ) FaceStation 2 알아두기 전원어댑터는 DC 24V(± 10%), 최소 2,500mA 이상의제품으로 IEC/EN 60950-1 승인을받은제품을사용하십시오. 전원어댑터에다른기기를연결하여사용하려면단말기의소모전력과다른기기에필요한소모전력을합한전류용량이상의어댑터를사용해야합니다. Secure I/O 2, 전기정 ( 전기식잠금장치 ), 제품은반드시개별전원을사용하십시오. 전원을함께연결하여사용하면장치가오작동할수있습니다. 별도의전원장치를사용할경우 FaceStation 2와전원장치간의거리에주의하십시오. 장치와전원장치는최대한가깝게설치해야합니다. 올바르게연결하지않을경우장치가오작동할수있으므로주의하십시오. 장치와전원장치의거리가먼경우 16 AWG 또는 18 AWG 케이블을사용할것을권장합니다. 사용하는케이블규격과설치환경에따라연결할수있는거리가다를수있습니다. 케이블규격 최대연장길이 16 AWG 150 m 18 AWG 136 m 20 AWG 90 m 전원어댑터 (DC 24V(± 10%), 2.5A) 를사용할경우전원케이블의길이를임의로연장하지마십시오. CAT5 UTP 2-Wire 케이블을전원공급용도로사용하지마십시오. 12

설치 네트워크연결 TCP/IP LAN 연결 ( 허브와연결 ) 일반타입의 CAT-5e 케이블을사용하여허브와연결할수있습니다. 허브 PC FaceStation 2 LAN 연결 (PC 와직접연결 ) FaceStation 2 는자동 MDI/MDIX 기능을가지고있으므로크로스케이블이나일반스트레이트타입의 CAT-5e 케이블로 PC 와직접 연결할수있습니다. PC FaceStation 2 알아두기 기가비트이더넷스위치를사용할때아래정보를확인하십시오. - Cat5e 비차폐꼬임선 (UTP) 을사용하십시오. - 4 쌍 (8 선 ) 을모두네트워크연결로사용하십시오. - 네트워크케이블의일부쌍이나선을다른용도로사용하지마십시오. 13

설치 TTL 입력연결 출입문센서 케이블실드 ( 옵션 ) 퇴실버튼 1 - TTL IN0 빨간색 2 - TTL IN1 노란색 3 - TTL GND 검은색 4 - SH GND 회색 FaceStation 2 14

설치 릴레이연결 Fail Safe Lock Fail Safe Lock을사용하려면아래그림과같이 N/C 릴레이를연결하십시오. Fail Safe Lock은평상시릴레이회로에전류가흐르며, 릴레이가동작하여전류를일시적으로차단하면출입문이열립니다. 정전이되거나외부요인으로장치의전원이끊길경우출입문이열립니다. 2 - RLY COM 파란색 3 - RLY NC 주황색 데드볼트 / 도어스트라이크 DC 전원 FaceStation 2 알아두기 출입문잠금장치가작동할때발생하는역전류로부터릴레이를보호하기위해그림과같이출입문잠금장치배선양쪽에다이오드를설치하십시오. 다이오드의설치방향에주의하십시오. 다이오드는출입문잠금장치와가깝게설치하십시오. FaceStation 2와출입문잠금장치는별도의전원을사용하십시오. Fail Secure Lock Fail Secure Lock을사용하려면아래그림과같이 N/O 릴레이를연결하십시오. Fail Secure Lock은평상시릴레이회로에전류가흐르지않으며, 릴레이가동작하여전류가흐르면출입문이열립니다. 정전이되거나외부요인으로장치의전원이끊길경우출입문이잠깁니다. 1 - RLY NO 흰색 2 - RLY COM 파란색 데드볼트 / 도어스트라이크 DC 전원 FaceStation 2 알아두기 출입문잠금장치가작동할때발생하는역전류로부터릴레이를보호하기위해그림과같이출입문잠금장치배선양쪽에다이오드를설치하십시오. 다이오드의설치방향에주의하십시오. 다이오드는출입문잠금장치와가깝게설치하십시오. FaceStation 2와출입문잠금장치는별도의전원을사용하십시오. 15

설치 자동문연결 1 - RLY NO 흰색 2 - RLY COM 파란색 퇴실버튼 감지센서 자동문제어장치 출입문잠금장치 FaceStation 2 16

설치 독립형연결 별도의 I/O 장치를연결하지않고 FaceStation 2 를직접출입문잠금장치, 퇴실버튼, 출입문센서등에연결할수있습니다. 릴레이연결 1 - RLY NO 흰색 2 - RLY COM 파란색 3 - RLY NC 주황색 TTL 연결 1 - TTL IN0 빨간색 2 - TTL IN1 노란색 3 - TTL GND 검은색 4 - SH GND 회색 케이블실드 ( 옵션 ) TTL 출입문센서 퇴실버튼 Fail Secure Lock 릴레이 또는 Fail Safe Lock FaceStation 2 데드볼트 / 도어스트라이크 DC 전원 전원 전원연결 1 - PWR +VDC 빨간색 ( 흰띠 ) 2 - PWR GND 검정색 ( 흰띠 ) DC 전원 PC 허브 알아두기 RS485 케이블로슬레이브장치를연결하여 FaceStation 2를다중출입문제어장치로사용할수있습니다. 슬레이브장치는더미리더로사용되며인증은마스터장치에서수행합니다. 연결할수있는최대슬레이브장치수는인증방법, 사용자수, 장치수에따라달라지며슬레이브장치수는인증속도에영향을줍니다. 마스터장치는 31개의슬레이브장치를제어할수있습니다. RS485 대역폭으로인해최대 7대의지문인식장치를연결할수있습니다. 지문인식장치가마스터장치일때 FaceStation 2를슬레이브장치로추가할수없습니다. FaceStation 2가마스터장치이고다른슬레이브장치가이미추가되었을때 FaceStation 2를슬레이브장치로추가할수없습니다. FaceStation 2가마스터장치이고 FaceStation 2를슬레이브장치로연결할때 1 대의 FaceStation 2만슬레이브장치로추가할수있습니다. 더자세한내용은슈프리마기술지원팀 (support@suprema.co.kr) 에문의하십시오. 17

설치 Secure I/O 2 연결 FaceStation 2에 I/O 장치인 Secure I/O 2를 RS-485로연결할수있습니다. FaceStation 2 와 Secure I/O 2의연결이끊기거나외부요인에의해 FaceStation 2 의전원이차단되더라도보안을유지할수있습니다. RS-485 케이블은 AWG24, 꼬임선 (Twisted Pair), 최대길이 1.2 km를사용하십시오. RS-485 데이지체인으로연결할경우종단저항 (120Ω) 을데이지체인연결의양끝에연결하십시오. 중간선로에연결할경우신호레벨이작아져통신성능이떨어지므로반드시데이지체인연결의양끝에연결하십시오. RS-485 연결 1-485 TRXP 파란색 2-485 TRXN 노란색 3-485 GND 검정색 4 - SH GND 회색 전원연결 1 - PWR +VDC 빨간색 ( 흰띠 ) 2 - PWR GND 검정색 ( 흰띠 ) DC 전원 RS-485 케이블실드 ( 옵션 ) FaceStation 2 전원 Secure I/O 2 DC 전원 허브 출입문센서 DC 전원 출입문잠금장치 퇴실버튼 PC 알아두기 RS485 케이블로슬레이브장치를연결하여 FaceStation 2를다중출입문제어장치로사용할수있습니다. 슬레이브장치는더미리더로사용되며인증은마스터장치에서수행합니다. 연결할수있는최대슬레이브장치수는인증방법, 사용자수, 장치수에따라달라지며슬레이브장치수는인증속도에영향을줍니다. 마스터장치는 31개의슬레이브장치를제어할수있습니다. RS485 대역폭으로인해최대 7대의지문인식장치를연결할수있습니다. 지문인식장치가마스터장치일때 FaceStation 2를슬레이브장치로추가할수없습니다. FaceStation 2가마스터장치이고다른슬레이브장치가이미추가되었을때 FaceStation 2를슬레이브장치로추가할수없습니다. FaceStation 2가마스터장치이고 FaceStation 2를슬레이브장치로연결할때 1 대의 FaceStation 2만슬레이브장치로추가할수있습니다. 더자세한내용은슈프리마기술지원팀 (support@suprema.co.kr) 에문의하십시오. 18

설치 Wiegand 연결 Wiegand input Device 로사용 케이블실드 ( 옵션 ) RFID 리더 1 - WG D0 초록색 2 - WG D1 흰색 3 - WG GND 검은색 4 - SH GND 회색 FaceStation 2 Wiegand output Device 로사용 케이블실드 ( 옵션 ) 제어장치 1 - WG D0 초록색 2 - WG D1 흰색 3 - WG GND 검은색 4 - SH GND 회색 FaceStation 2 19

제품사양 제품사양 구분항목규격 크리덴셜 일반 저장용량 인터페이스 전기규격 바이오인식 RF 카드 RF 인식거리 * 위조얼굴검출 CPU 메모리 LCD 종류 얼굴 FS2-D: 125kHz EM & 13.56Mhz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, NFC FS2-AWB: 125kHz EM, HID Prox & 13.56Mhz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, iclass SE/SR, NFC, BLE MIFARE/DESFire/iCLASS : 50 mm / EM/HID Prox/Felica: 30 mm, BLE: 50 mm 지원 1.4 GHz Quad Core 8GB Flash + 1GB RAM 4 TFT 컬러터치 LCD 해상도 800 x 480 소리 24 bit/voice DSP ( 에코캔슬 ) 동작온도 -20 C ~ 50 C 보관온도 -40 C ~ 70 C 동작습도 보관습도 카메라종류 0% ~ 80%, 비응축 0% ~ 90%, 비응축 CMOS 카메라해상도 720 x 480 카메라각도 치수 (W x H x D) 무게 인증 비주얼렌즈 : 대각선 92.7 IR 렌즈 : 대각선 58 141 mm x 164 mm x 125 mm 장치 : 628 g 최대사용자수 (1:1) 30,000 최대사용자수 (1:N) 3,000 최대템플릿수 (1:1) 900,000 최대템플릿수 (1:N) 90,000 최대로그수 5,000,000 최대이미지로그수 50,000 Wi-Fi 이더넷 브래킷 : 74 g ( 와셔및볼트포함 ) CE, FCC, KC, RoHS, REACH, WEEE 지원 (Built-in, IEEE 802.11 b/g) 지원 (10/100/1000 Mbps, 자동 MDI/MDI-X) RS-485 1 채널마스터 / 슬레이브 ( 선택가능 ) Wiegand TTL 입력 릴레이 USB 탬퍼 전원 스위치입력 VIH 스위치입력 VIL 입력 1 채널, 출력 1 채널 입력 2 채널 1 개 USB 2.0 (Host) 지원 전압 : 24 VDC 전류 : 최대 2.5 A 최소 : 3 V 최대 : 5 V 최대 : 1 V 스위치풀업저항 4.7 kω ( 입력단자는 4.7 kω 으로풀업되어있습니다.) Wiegand 출력 VOH Wiegand 출력 VOL Wiegnad 출력풀업저항 릴레이 * RF 인식거리는설치환경에따라다를수있습니다. 4.8 V 이상 0.2 V 이하 1 kω 으로내부풀업 전압 : 최대 30 VDC 전류 : 1 A, 최대 2 A 20

제품사양 제품치수 ( 단위 : mm) 21

FCC 준수정보 FCC 준수정보 이기기는 FCC 규제의 Part 15를준수합니다. 작동은다음의두조건을따릅니다. (1) 이기기는해로운전파방해를발생시키지않습니다. (2) 이기기는원치않는작동을일으키는전파방해를포함한어떠한전파방해도수용합니다. 참고 : 이기기는 Class B 디지털기기에대한제한사항을준수하여테스트를거쳤고 FCC규제의 Part 15에적합하다는것을검증받았습니다. 이러한제한은주거설치에서해로운전파방해로부터적정한수준의보호를제공하기위해고안되었습니다. 이장비는무선주파수에너지를생성, 사용및방사하므로지침에따라설치하여사용하지않을경우무선통신에서유해한간섭을일으킬수있습니다. 그러나특정한설치에서는전파방해가발생하지않는다는어떠한보장도하지않습니다. 본장비를켜거나끌때라디오또는 TV 수신에해로운전파방해를일으키는경우, 다음중하나이상의조치를수행하여전파방해를해결하십시오. 수신안테나의방향을조정하거나재설치합니다. 장비와수신기사이의간격을늘립니다. 장비를수신기가연결된회로와다른회로의콘센트에연결합니다. 판매업체나숙련된라디오 /TV 기술자에게문의합니다. 제조업체가승인하지않은제품변경또는개조에대해서는 FCC 규칙에따라제품을사용할수있는권리가무효화됩니다. 이제품과제품의안테나를다른안테나또는 RF 전송장치와함께설치하지마십시오. 사용자 ( 또는근처의다름사람 ) 와제품의안테나간에최소 20cm 의거리를유지하십시오. 유럽연합적합성선언 (CE) 이제품은 R & TTE (1999/5/EC) 지침의규정에따라 CE 마크를제공합니다. 슈프리마는이문서에서설명하는장치에유럽연합라디오및통신단말기장치지침 (R&TTE 1999/5/EC) 을준수하는 CE 마크가있음을선언합니다. 이장치는지침에따라클래스 1 라디오장치입니다. 더자세한내용은아래연락처로연락하십시오. 슈프리마웹사이트 : http://www.suprema.co.kr 주소 : 경기도성남시분당구정자일로 248 ( 정자동 6) 파크뷰타워 16층전화 : 031-783-4510 / 팩스 : 031-783-4517 22

부록 부록 면책조항 이설명서에있는정보는슈프리마제품과관련하여제공하는것입니다. 슈프리마가보장하는판매합의사항과조건에포함된제품에한해서만사용권리가인정됩니다. 이설명서에서다루고있는그이외의지적재산권에대한라이선스권리는인정되지않습니다. 슈프리마는슈프리마제품의판매또는사용과관련하여, 특정목적을위한제품의적합성과상업성, 그리고특허, 저작권, 기타지적재산권의침해에대해서는어떠한보증이나책임을지지않습니다. 의료, 인명구조, 생명유지와관련된상황이나제품의오작동으로인해사람이다치거나목숨을잃을수있는상황에서는슈프리마의제품을사용하지마십시오. 만약구매자가앞에예로든상황에서제품을사용하다가사고가발생한다면, 설사제품의설계나생산과정에서부족한점이발견되어이를중요한과실로주장한다하더라도슈프리마의직원, 자회사, 지사, 제휴사, 배포사는책임을지지않으며, 변호사선임비를포함하여이와관련한모든직간접적인비용이나지출에대해서도변제하지않습니다. 슈프리마는제품의안정성, 기능, 디자인을개선하기위해적절한공지없이어느때이건제품의규격과명세서를변경할수도있습니다. 설계자들은 " 구현될예정 " 이나 " 정의되지않음 " 으로표시된기능이나설명은항상변동될수있다는점을염두에두어야합니다. 슈프리마는멀지않은미래에이러한것들을구현하거나정의할것이며, 호환성의문제를포함하여이로인해발생할수있는어떠한문제점에대해서도책임을지지않습니다. 제품을주문하기전에가장최신의규격서를얻고자한다면슈프리마, 슈프리마의판매대행사, 지역배포사에문의하십시오. 저작권공지 이문서의저작권은슈프리마에게있습니다. 다른제품이름, 상표, 등록된상표에대한권리는각각그것을소유한개인이나단체 에게있습니다. 오픈소스라이선스 이제품의소프트웨어는 Linux 커널 3.x 버전을수정하여제작되었으며, Linux 커널의라이선스는 GPL을따르고있습니다. GPL 라이선스는이매뉴얼의 GNU General Public License에서확인할수있습니다. 이제품에포함된 OpenSSL은 OpenSSL 라이선스와 Original SSLeay 라이선스를따릅니다. OpenSSL 라이선스와 Original SSLeay 라이선스는이매뉴얼의 OpenSSL License와 Original SSLeay License에서확인할수있습니다. 이제품에포함된 Linux 커널 3.x 기반으로수정된소스는 tech@supremainc.com으로문의하여다운로드받을수있습니다. GNU General Public License Version 3, 29 June 2007 Copyright 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. 23

부록 For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the 24

부록 work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machinereadable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a 25

부록 written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A User Product is either (1) a consumer product, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, normally used refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) 26

부록 with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered further restrictions within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An entity transaction is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's contributor version. A contributor's essential patent claims are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a patent license is any express agreement or commitment, however denominated, not to enforce a 27

부록 patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. Knowingly relying means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is discriminatory if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT 28

부록 LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS OpenSSL License Copyright (c) 1998-2017 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). Hudson (tjh@cryptsoft.com). This product includes software written by Tim Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an 29

부록 acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] 30

( 주 ) 슈프리마 13554 경기도성남시분당구정자일로 248 파크뷰타워 16 층영업문의 031 783 4510 korea@suprema.co.kr I 고객지원 1522 4507 cs@suprema.co.kr 2018 Suprema Inc. 이문서에표기된슈프리마, 제품명, 번호는슈프리마의등록상표입니다. 모든회사명과제품명은해당회사의상표이거나등록상표입니다. 제품외관, 제조상태및사양은사전통지없이변경될수있습니다.