ISSUE NO : 08083789 Rev: 000 DATE OF ISSUE : 2007. 07. 12 SPECIFICATION MODEL : SLSRGBW815TS [Approved Rank : V F(S), λ D(A,B,C,D), I V(S)] RGBW TOP VIEW CUSTOMER : 대표승인원 SAMSUNG ELECTRO-MECHANICS DRAWN CHECKED APPROVED CUSTOMER : 대표승인원 DRAWN CHECKED APPROVED SAMSUNG ELECTRO-MECHANICS CO,.LTD. 314. MAETAN3-DONG, YEONGTONG-KU, SUWON-SI,GYUNGKI-DO,KOREA,442-743 SAMSUNG ELECTRO-MECHANICS PAGE 1/19
Contents 1. Product outline-------------------- 3 2. Absolute Maximum Rating------------ 3 3. Characteristics ------------------- 3 4. Typical Characteristic Graph --------- 5 5. Color Mixing Characteristics ---------- 6 6. Outline Drawing and Dimension ------- 7 7. Reliability Test Items and Conditions --- 8 8. Solder Conditions ------------------ 9 9. Taping Dimension ------------------ 10 10. Label Structure ------------------- 11 11. Lot Number ---------------------- 11 12. Reel Packing Structure ------------- 12 13. Aluminum Vinyl Bag----------------- 13 14. Precaution for Use ----------------- 14 15. Hazard Substance Analysis------------16 16. Revision History ------------------- 19 SAMSUNG ELECTRO-MECHANICS PAGE 2/19
1. Product Outline 1) Feature. Lead Frame Type LED Package ( 5.2 * 6.0 * t 1.3mm ). Beam Angle ( θ : 120 0 ).AlGaInP,GaN/Al 2O 3 Chip & Long Time Reliability 2) Applications. Indoor, Outdoor Display and etc. 2. Absolute Maximum Rating Item Symbol Absolute Maximum Rating Red Green Blue Unit Forward Current I F 30 30 30 ma Pulse Forward Current I FP 100 100 100 ma Reverse Voltage V r 5 - - V Reverse Current I R - 85 85 ma Operating Temperature T opr -30 85 Storage Temperature Range T stg -40 100 -. I FP Conditions : Duty 1/10 Pulse Width 10msec 3. Characteristics Electrical properties ( Ta : 25 O C ) Item Symbol Condition Rank Color min. Typ. MAX. Unit Forward Red 1.8 2.1 2.6 Voltage V F I F = 20 ma S Green 2.9 3.2 3.7 V (*) Blue 2.9 3.2 3.6 Reverse Current I R V R= 5V - R - - 100 μa Reverse Voltage V r I R =10mA - G, B 0.6-2.0 V Dominant Wavelength Item Symbol Condition Rank ( Ta : 25 O C ) Color Unit Red Green Blue A 619 ~ 627 523 ~ 528 460 ~ 466 Dominant Wavelength (*) λ D I F = 20 ma B 619 ~ 627 523 ~ 528 466 ~ 472 C 619 ~ 627 528 ~ 533 460 ~ 466 nm D 619 ~ 627 528 ~ 533 466 ~ 472 SAMSUNG ELECTRO-MECHANICS PAGE 3/19
Luminous Intensity ( Ta : 25 O C ) Item Symbol Condition Rank Color min. typ. MAX. Unit Red 550 700 880 Luminous Intensity (*) I V I F I F = 20 ma = 60 ma (R,G,B S Green 1200 1400 1700 Blue 250 400 650-1900 2400 3050 mcd I F = 20 ma ) * Tolerance : V F ;±0.1V,λ D ; ±2nm, I V ;±10%, * Luminous intensity measuring equipment : CAS140 B Approved Rank Item V F λ D I v Rank S A, B, C, D S * Each reel contains only one of the A, B, C or D, a segment (1/4) of the λ D rank. SAMSUNG ELECTRO-MECHANICS PAGE 4/19
4. Typical Characteristics Graph * These graphs show typical values. (Ta:25 O C ) Relative Luminous Intensity (%) 1000 100 10 1 Relative Luminous Intensity vs. Forward Current B G R 1 10 100 Forward Current(mA) Forward Current IF(mA) Forward Current vs. Forward Voltage 100 10 1 B 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage VF(V) R G 40 Forward Current Derating Curve (Discrete Color) 100 Forward Current Derating Curve (Full Color) Forward Current IF(mA) 30 20 10 --- Blue, Green - - Red Forward Current IF(mA) 80 60 40 20 Relative Emissio Intensity(%) 0 100 50 0 0 20 40 60 80 100 Ambient Temp(deg) SpectrumDistribution B G R 400 500 600 700 Wave Length(nm) I F T a 0 0 20 40 60 80 100 Ambient Temp(deg) Radiation Diagram = 20 ma = R.T 80 80 70 90 70 50 60 60 50 40 40 30 30 20 20 10 10 0 0 100 80 60 40 20 0 20 40 60 80 100 Relative Luminous Intensity(%) Y X Relative Luminous Intensity (%) 120 110 100 90 80 70 60 50 Relative Luminous Intensity vs. Ambient Temperature 20 40 60 80 Ambient Temperature Ta ( ) B G R Relative Forward Voltage (%) Forward Voltage vs. Ambient Temperature 110 100 90 80 70 60 50 20 40 60 80 Ambient Temperature Ta ( ) SAMSUNG ELECTRO-MECHANICS PAGE 5/19
5. Color Mixing Characteristics These graphs and data are example values. Color Mixing Data : Bias Current : Red 20mA, Green 20mA, Blue 10mA Standard Rank Color CIE Red Green Blue x y IV SAS 0.292 0.283 2.18 SBS 0.298 0.3167 2.30 20mA 20mA 10mA SCS 0.294 0.280 2.20 SDS 0.30 0.316 2.29 Color Mixing Spectrum Red Blue Green y Chromaticity Diagram 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 510 500 520 490 470 B A 450 550 D C 570 590 610 700 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 x SAMSUNG ELECTRO-MECHANICS PAGE 6/19
6. LED Package Outline Dimensions Common Cathode Anode Cathode Circuit Diagram Land Pattern 6 4 3 5 2 1 NUMBER ITEM MATERIAL 1 FRAME Copper Frame(Silver Plated) 2 LED CHIP AlGaInP, GaN/Al 2O 3 3 Zener Diode Si 4 WIRE Gold Wire 5 RESIN Resin 6 PACKAGE Heat-resistant Polymer SAMSUNG ELECTRO-MECHANICS PAGE 7/19
7. Reliability Test Items and Conditions 1) Test Items and Results Test Item Room Temperature life test High Temperature humidity life test High Temperature life test Low Temperature life test Thermal Shock High Temperature Storage Low Temperature Storage High Temperature humidity Storage Temperature humidity Cycle Reflow Soldeing (Pb-Free) Test Conditions 25 ±3, Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma 60 ±3, 95%±2%RH, Red;DC18 ma, Green;DC18 ma, Blue;DC18 ma 85 ±3, Red;DC9 ma, Green;DC9 ma, Blue;DC9 ma -30 ±3, Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma -40 ~ 100 0.5 h 0.5 h Test Hours/Cycles Sample No 500 h 50 500 h 50 500 h 50 500 h 50 100 cycles 22 Ta=100 ±3 500 h 22 Ta=-40 ±3 500 h 22 60 ±3, 95%±2%RH 500 h 50 25 ~ 65 ~ -10 24hrs/1cycle, 95%RH Peak 260±5 for 10sec, 220 over time 60sec max 10 cycles 22 3 times 22 ESD(HBM) 5 times 5 On/Off test -R1:10MΩ, R2:1.5KΩ, C:100pF 50 ±3, 95%±2%RH, On/2sec, Off/2sec Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma 120h 50 SAMSUNG ELECTRO-MECHANICS PAGE 8/19
2) Criteria for Judging the Damage Item Symbol Test Condition Limit Min Max Forward Voltage V F I F=20 ma - U.S.L.*1.2 Luminous Intensity IV I F=20 ma L.S.L.*0.5 - * USL : Upper Standard Level LSL : Lower Standard Level 8. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. Preheating: 150~180 Peak Temp. : 260±5, MAX Max.. 10sec Time above 220 : Max. 60sec Max. 60sec Max.Temp.gradientinCooling:-5 /sec 2) For Manual Soldering Not more than 5 seconds @MAX300, under soldering iron.(one time only) SAMSUNG ELECTRO-MECHANICS PAGE 9/19
9. Taping Dimension Polarity End Start More than 40 mm Mounted with More than (100~200) mm Leading part more than Unloaded tape Flash LED Unloaded tape (200~400) mm (1) Quantity : The quantity/reel to be 1000pcs. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a damp proof package. SAMSUNG ELECTRO-MECHANICS PAGE 10/19
10. Label Structure abc SAS SLSRGBW815TS SAS 01 GLAR94001 / 1001 / 1,000pcs Rank Code Rank Code a : Forward Voltage(V F) Rank (refer to page. 3) b : Wavelength(λ D) Rank (refer to page. 3) c : Luminous Intensity(I V) Rank (refer to page. 4) 11. Lot Number The Lot number is composed of the following characters SAS SLSRGBW815TSNSWS SAS 01 GLAR94001 / 1001 / 1,000pcs / I / 1000PCS : Production Site (S:SEMCO, G:Gosin China) : L (LED) : Product State (A:Normality, B: Bulk, C:First Production, R:reproduction, S:Sample) : Year (Q:2006, R:2007, S:2008...) : Month (1 ~ 9, A, B) : Day (1 ~ 9, A, B ~ V) : SEMCO. Product number (1 ~ 999) : Reel Number (1 ~ 999) SAMSUNG ELECTRO-MECHANICS PAGE 11/19
12. Reel Packing Structure Reel SAS SLSRGBW815TS SAS 01 GLAR94001 / 1001 / 1,000pcs LEVEL 2a Aluminum Vinyl Bag SAS SLSRGBW815TS SAS 01 GLAR94001 / 1001 / 1,000pcs Material : Paper(SW3B(B)) SIZE(mm) TYPE a b c 7inch 245 220 182 1SIDE SAS SLSRGBW815TS SAS 01 GLAR94001 / 1001 / 10,000pcs H CHIP LED W 1 [Box Label] L SAMSUNG ELECTRO-MECHANICS PAGE 12/19
13. Aluminum Vinyl Bag SAS SLSRGBW815TS SAS 01 GLAR94001 / 1001 / 1,000pcs Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag SAMSUNG ELECTRO-MECHANICS PAGE 13/19
14. Precaution for Use ( 취급상주의사항 ) 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류방지를위해전압의미세한이동에의해야기되는전류의순간변화를방지하기위해저항등의설치를권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은물, 오일, 유기물과같은액체타입에서의사용은제한되며, 세정이필요할시에는 IPA 사용을권장함. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. LED의발광시, 동작전류는주변최고온도를고려하여결정되어야함. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SEMCO, they should be packed by a sealed container with nitrogen gas injected. (Shelf life of sealed bags: 12 months, temp. 0~40, 20~70%RH) LED의보관은청정한환경에서보존되어져야하며, 만약삼성전기로부터공급받는후 3개월또는그이상보관이필요하다면질소가스를동봉한보존용기에보관되어야함. ( 보존 bag의수명 : 12 개월, 보존온도 0~40, 습도 20~70%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, orother high temperature processes must be: 보존 Bag이개봉된후에, 납땜이나 reflow등의높은온도에노출되는제품은다음의사항에부합되어야함. a.mounted within 168 hours (7 days) at an assembly line with a condition of no more than 30 /60%RH, a. 제품은 30 /60%RH보다같거나낮은조립조건에서 168시간 (7일) 이내에조립되어야함. b. Stored at <10% RH. b. 10% 이하의상대습도에서보관되어야함. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 사용하지않은제품은방습팩에넣어개봉부위를닫아서다시포장한후, 건조한장소에서보관할것을권장함. SAMSUNG ELECTRO-MECHANICS PAGE 14/19
7) Devices require baking before mounting, if humidity card reading is >65% at 23±5. 만약습도표시카드의수치가 23±5 에서 65% 이상이라면, 제품실장전에 baking하여야함. 8) Devices must be baked for 24hours at 65±5, if baking is required. 만약 baking이필요하다면, 제품은 65±5 에서 24시간정도 baking 되어야함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는정전기및서지에민감한제품이므로, LED 제품을다룰시에는정전기방지장갑이나손목밴드를사용하기를권장함. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. 만약절대허용치를초과하는전압이 LED에가해지면, LED 소자는파괴되거나손상될수있음. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 손상된제품은누설전류의증가, Turn on 전압의저하, 저전류에서의점등불량등의이상거동을보일수있음. SAMSUNG ELECTRO-MECHANICS PAGE 15/19
15. Hazard Substance Analysis SAMSUNG ELECTRO-MECHANICS PAGE 16/19
SAMSUNG ELECTRO-MECHANICS PAGE 17/19
SAMSUNG ELECTRO-MECHANICS PAGE 18/19
Revision History (Model:SLSRGBW815TS) Date Revision History Writer Drawn Approved 2007.07.02 New Version S.B Yun Y.C. Kim 2008.04.01 Red IV modify S.B Yun B.M Kim SAMSUNG ELECTRO-MECHANICS PAGE 19/19