MS 5015 시리즈커넥터는 50 여년전에는군사용으로개발되었으나최근에이르러서는저렴한가격과높은신뢰성이필수요소인다양한산업에서사용되고있습니다. 이커넥터는높은품질의알루미늄합금또는카드뮴으로제작되고, 카드뮴사용이금지되어있는곳에서는아연도금을널리사용하고있습니다. 일반산업용으로는방수되지않는것으로공급되고있습니다그러나필요한경우에는사용환경적인상태를고려하여방수형으로공급됩니다. "E" Class 와 "F" Class 커넥터는널리쓰이고있는디자인에기초한 Cable Clamp 를포함하고있습니다. "R" Class 커넥터는또한가벼운중량과짧은길이의 Endbell 을포함하고있으며 "F" Class 는방수를위하여 Coupling Nut 내부에 O-Ring 이부착되어있습니다. 이커넥터는결합의용이를위해나사산이있는 Coupling Nut 를포함하고있으며납땜종단을위해제작된접점을포함하고있습니다. 표준도금은국방색이지만니켈도금도가능합니다. Prefix MS-Military standard 의略字이며적용규격은 MIL-C-5015 임 Shell Style 3100 - Wall mounting receptacle 3101 - Cable connecting plug 3102 - Box mounting receptacle 3106 - Staight plug 3108-90' angle plug Class The standard "MS" connector range was originally developed over 50 years ago for the Military forces and has since been adopted for use in various other industries where low cost and high reliability are essential. MS Class A B Application General purpose - Solid endbell General purpose - Split endbell These connectors are made in a high grade aluminium alloy and can be supplied with a cadmium, or the now more popular zinc plating where the use of cadmium is prohibited. For general industrial usage the connectors are supplied as an unsealed version or if preferred with wire sealing grommets for environmental conditions. The "E" and "F" connectors have a mechanical cable clamp based on the popular Cannon design. The "R" type connectors can also be supplied with a lightweight and shorter endbell and both this and the "F" version have an additional "O" ring seal under the coupling nut for a better interfacial seal. These connectors have a threaded coupling nut for ease of application and require no tooling as the contacts are manufactured for solder termination. C E K R Material & Finish ㆍ ㆍ ㆍ Pressurized - Receptacle Environment Resistant Fire & Flame Resistant Environment Resistant Shell - high Grade Aluminum alloy Die-Casting,oilver drab Chromate over caduim or Zind plating. Insulator - Buk molding Compound (polyester) & polychloropren rubber ( "A" class only) Contacts - High conductive copper alloy or Bress, 100 l lnches Silver plating. ㆍ Contact Retention clip-heat treated berryllium copper. The standard finish is olive drab green but we can offer a bright nickel finish if required subject to a minimum order quantity.
Contact Current Capacity The rated current of a connector will change depending on the number of contact compsoing the connector and also the contact size. The table below shows the maximum permissible value per contact when assembled in an inslator Contact size Diameter of the contacting part of pin contact Current Capacity (Amps) Contact unit Assembled in insulator # 16.063 inch(1.6mm) 22 13 # 12.094 inch(1.4mm) 41 23 # 8.142inch(3.6mm) 73 46 # 4.224 inch(5.7mm) 135 80 # 0.358 inch(9.1mm) 245 150 Voltage Rating Classification Code Test Voltage Operating Voltage (RMS) D.C A.C(RMS) Air Spacing Nominal INST 1000 250 200 ㅡ A 2000 700 500 D 2800 1250 900 E 3500 1750 1250 B 4500 2450 1750 C 7000 4200 3000 Compatble Wire Size Size Contact Solder pot diameter Wire size(awg).063inch (1.6mm).126inch (3.2mm).189inch (4.8mm).252inch (6.4mm).311inch (7.9mm) Applicable Wire Size Creepage Distance Nominal.063inch (1.6mm).126inch (3.2mm).189inch (4.8mm).252inch (6.4mm).311inch (7.9mm) 1.0inch (25.4mm) Conductor cross-section area Insulation Resistance 5,000MΩ Minimum (at 25 ) Temperature Range ㅡ 55 to 125 ㆍ ㆍ Durability 500Cycle Connection/ Disconnection Thermal shock-mil-std-202 Method 107 - Themperature range( ㅡ 55 ~ 125 ) Humidity : - Relative hunmidity : 95%±3% - Temperature : 71 ±2 - Time : 14days ㆍ Vibration : - MIL-STD-1344 method 2005-10~500Hz 0r 10G units - sweeptime : 15minutes - test current : 100mA ㆍ Shock, Electical : 1/2 sine wave Transient shock impulses of 50G units - Time : 11±1µ sec - Test current : 100mA ㆍ Salt spray : - MIL-STD-1344, Method 1001 - Salt solution : 5% - Time : 48Hours ㆍ Durability -500 mating/umating operatings ㆍ Contact engaging and separating forces. - 16 Contact,2 kg Min, 48 kg. - 12 Contact,3 kg Min, 80 kg. - 8 Contact,5 kg Min, 160 kg. - 4 Contact, 10 kg Min, 240 kg. - 0 Contact, 15 kg Min, 329 kg. # 16 # 12 # 8 # 4.073 inch (1.85mm).116 inch (2.95mm).209 inch (5.31mm).333 inch (8.45mm) # 16 ~ # 22 1.25mm² max. # 12 ~ # 14 3.5mm² max. # 8 ~ # 10 8mm² max. # 4 ~ # 6 22mm² max. If you want more detailed information, * please call international business department. 자세한사항은당사영업부로문의바랍니다. # 0.469 inch (11.91mm) # 0 ~ # 2 50mm² max.
PREFIX MS ㅡ Conforms to latest MIL -C-5015 revision CLASS E/F ㅡ Environmental with resilient insulators and integral cable clamp. R ㅡ Environmental with resilient insulators and shortened light weight end bell; also additional sealing with O ring under coupling nutin styles 3106 and 3108 MS-3106R STRAIGHT PLUG MS-3106F STRAIGHT PLUG MS-3106E STRAIGHT PLUG ENDBELL FERRULE GROMMET PIN CONTACTS INSULATOR COUPLING NUT BARREL O RING
RECEPTACLES shell Size A ±0.79 B ±0.12 ΦC +0.38-0.00 D +0.79-0.00 E /Min F ΦG +0.25-0.12 H +0.00-4.77 J Thread-2A K Thread-2A 8S 22.23 15.09 9.40 14.28 3.96/1.58 37.31 3.05 13.51 ½ - 28UNEF ½ - 28UNEF 10S 25.40 18.26 11.38 14.28 3.96/1.58 38.88 3.05 16.60 ⅝ -24UNEF ½ - 28UNEF 10SL 25.40 18.26 11.38 14.28 3.96/1.58 38.88 3.05 19.35 ⅝ -24UNEF ⅝ -24UNEF 12S 27.79 20.62 14.15 14.28 3.96/1.58 42.87 3.05 19.35 ¾ - 20UNEF ⅝ -24UNEF 12 27.79 20.62 14.15 19.05 3.96/1.58 52.37 3.05 19.35 ¾ - 20UNEF ⅝ -24UNEF 14S 30.18 23.01 17.33 14.28 3.96/1.58 42.87 3.05 23.01 ⅞ - 20UNEF ¾ - 20UNEF 14 30.18 23.01 17.33 19.05 3.96/1.58 52.37 3.05 23.01 ⅞ - 20UNEF ¾ - 20UNEF 16S 32.54 24.61 20.50 14.28 3.96/1.58 42.81 3.05 26.21 1-20UNEF ⅞ - 20UNEF 16 32.54 24.61 20.50 19.05 3.96/1.58 52.37 3.05 26.21 1-20UNEF ⅞ - 20UNEF 18 34.93 26.97 23.68 19.05 5.15/2.39 52.37 3.05 29.36 1⅛- 18UNEF 1-20UNEF 20 38.10 29.36 26.88 19.05 5.15/2.39 55.57 3.05 32.56 1¼ -18 UNEF 1 3/16-18UNEF 22 41.28 31.78 30.03 19.05 5.15/2.39 55.57 3.05 35.71 1⅜ -18 UNEF 1 3/16-18UNEF 24 44.45 34.93 33.20 20.63 5.15/2.39 58.72 3.73 38.91 1½ - 18UNEF 1 7/16-18UNEF 28 50.80 39.67 38.77 20.63 5.15/2.39 58.72 3.73 45.26 1¾ -18 UNS 1 7/16-18UNEF 32 57.15 44.45 45.12 22.23 9.11/3.18 61.92 4.39 51.61 2-18UNS 1¾ -18UNS 36 63.50 49.23 50.68 22.23 9.11/3.18 61.92 4.39 57.96 2¼ - 16UN 2-18UNS 40 69.85 55.58 57.03 22.23 9.11/3.18 61.92 4.39 64.31 2½ - 16UN 2¼ - 16UN 44 76.20 60.33 63.38 22.23 9.11/3.18 65.07 4.39 70.66 2¾ - 16UN 2½ - 16UN 48 82.55 66.68 69.73 22.23 9.11/3.18 65.07 4.39 77.01 3-16UN 3-16UN
PLUGS she11 Size ΦA MAX ΦB + 0.00-0.25 ( 외경 ) ΦC +0.38-0.00 ( 내경 ) D ± 0.12 E MaX F MaX G MaX H +0.38-0.00 ( 내경 ) I Min J K L(-24), M(-2B) Thread N Thread-2A 8S 21.43 9.27 6.41 13.49 37.31 23.82 44.45 9.40 9.53 1.57 13.46 ½ - 28UNEF ½ - 28UNEF 10S 24.61 11.18 8.21 13.49 38.88 25.40 44.45 11.38 9.53 2.06 16.66 ⅝ -24UNEF ½ - 28UNEF 10SL 24.61 11.33 10.06 13.49 38.88 25.40 46.02 11.38 9.53 1.57 16.66 ⅝ -24UNEF ⅝ -24UNEF 12S 26.97 14.10 11.43 13.49 42.87 26.97 50.80 14.15 9.53 1.57 19.43 ¾ - 20UNEF ⅝ -24UNEF 12 26.97 14.10 11.43 18.26 52.37 26.97 57.15 14.15 15.88 1.98 19.43 ¾ - 20UNEF ⅝ -24UNEF 14S 29.36 17.15 13.37 13.49 42.87 28.57 53.97 17.33 9.53 1.83 22.60 ⅞ - 20UNEF ¾ - 20UNEF 14 29.36 17.15 13.37 18.26 52.37 28.57 58.72 17.33 15.88 1.98 22.60 ⅞ - 20UNEF ¾ - 20UNEF 16S 31.75 20.45 16.54 13.49 42.87 30.17 60.32 20.50 9.53 1.83 25.78 1-20UNEF ⅞ - 20UNEF 16 31.75 20.45 16.54 18.26 52.37 37.17 65.07 20.50 15.88 1.98 25.78 1-20UNEF ⅞ - 20UNEF 18 34.13 23.62 19.72 18.26 52.37 33.32 68.27 23.68 15.88 2.77 28.95 20 37.31 26.67 23.68 18.26 55.57 34.92 76.98 26.88 15.88 2.77 32.13 1⅛ - 18UNEF 1¼ -18 UNEF 1-20UNEF 1 3/16-18UNEF 22 40.48 29.85 26.07 18.26 55.57 34.92 76.98 30.03 18.88 2.97 35.30 1⅜ - UNEF 1 3/16-18UNEF 24 43.66 33.02 29.247 18.26 58.72 39.67 86.51 33.20 15.88 2.97 38.48 1½ - UNEF 1 7/16-18UNEF 28 50.01 38.61 34.80 18.26 58.72 39.67 86.51 38.77 15.88 2.97 44.83 1¾ - UNS 1 7/16-18UNEF 32 56.36 44.96 41.15 18.26 61.92 47.62 95.25 45.12 15.88 2.97 51.18 2-18UNS 1¾ - UNS 36 62.71 50.29 46.69 18.26 61.92 52.37 100.02 50.68 15.88 2.97 57.65 2¼ - 16UN 2-18UNS 40 69.06 56.64 52.25 18.26 61.92 53.97 120.65 57.03 15.88 - - 2½ - 16UN 2¼ - 16UN 44 75.41 63.12 58.67 18.26 65.07 57.15 120.65 63.38 15.88 - - 2¾ - 16UN 2½ - 16UN 48 81.76 69.47 65.02 18.26 65.07 60.33 127.79 69.73 15.88 - - 3-16UN 3-16UN
Superseded Part Number* Fits E Min E L ±0.79 P ±0.79 R ±0.79 A Thread MS3057-3A 8S - 10S 2.59 6.35 20.62 17.48 20.62 ½ - 28UNEF-2B MS3057-4A 10SL, 12SL, 12 3.56 7.92 20.62 20.62 22.22 ⅝ - 24UNEF-2B MS3057-6A 14S, 14 4.95 11.13 22.22 24.61 26.97 ¾ - 20UNEF-2B MS3057-8A 16S, 16 6.48 14.27 23.83 27.79 29.36 ⅞ - 20UNEF-2B MS3057-10A 18 7.24 15.88 23.83 30.18 31.75 1-20UNEF-2B MS3057-12A 20, 22 8.89 19.05 23.83 34.92 37.31 1 3/16-18UNEF-2B MS3057-16A 24, 28 11.89 23.83 26.19 42.06 42.88 1 7/16-18UNEF-2B MS3057-20A 32 16.87 31.75 27.79 51.59 51.59 1¾ - 18UNS-2B MS3057-24A 36 17.63 34.92 29.36 56.36 57.94 2-18UNS-2B MS3057-28A 40 23.14 41.28 42.88 63.50 68.28 2¼ -16UN-2B MS3057-32A 44-47.62 44.45 70.64 74.63 2½ - 16UN-2B MS3057-40A 48-60.32 44.45 83.34 39.90 3-16UN-2B MS Part Number Fits C ±0.41 L ±0.79 R ±0.41 MS3420-3 8S - 10S 9.63 73.02 3.30 MS3420-4 10SL, 12SL, 12 12.83 69.85 5.59 MS3420-6 14S, 14 15.72 66.68 7.92 MS3420-8 16S, 16 18.90 63.50 11.10 MS3420-10 18 22.07 60.32 14.27 MS3420-12 20, 22 27.03 57.15 15.88 MS3420-16 24, 28 33.38 53.98 19.05 MS3420-20 32 40.54 50.80 23.80 MS3420-24 36 46.91 47.62 31.75 MS3420-28 40 52.96 44.45 34.92 MS3420-32 44 59.31 41.28 41.25 MS3420-40 48 72.01 38.10 47.60
Protective Cap Superseded MS Number Fits B C Dia E D Dia A Thread MS25043-8D 8S 11.91 17.48 114.30 3.81 ½-28UNEF-2B MS25043-10D 10S,10SL 11.91 20.70 114.30 3.81 ⅝-24UNEF-2B MS25043-12D 12S,12SL 11.91 25.40 127.00 3.81 ¾-20UNEF-2B MS25043-14D 14,14S 11.91 28.58 127.00 3.81 ⅞-20UNEF-2B MS25043-16D 16,16S 11.91 30.18 127.00 3.81 1-20UNEF-2B MS25043-18D 18 11.91 34.14 127.00 3.81 1⅛-18UNEF-2B MS25043-20D 20 11.91 37.31 139.70 3.81 1¼-18UNEF-2B MS25043-22D 22 11.91 40.49 152.40 3.81 1⅜-18UNEF-2B MS25043-24D 24 11.91 43.66 209.55 4.60 1½-18UNEF-2B MS25043-28D 28 13.49 50.01 209.55 5.00 1¾-18UNS-2B MS25043-32D 32 13.49 56.36 209.55 5.00 2-18UNS-2B MS25043-36D 36 13.49 62.71 209.55 5.00 2¼-16UN-2B MS25043-40D 40 13.49 69.06 209.55 5.00 2½-16UN-2B MS25043-44D 44 13.49 75.41 209.55 5.00 2¾-16UN-2B MS25043-48D 48 13.49 80.98 209.55 5.00 3-16UN-2B Superseded MS Number Fits B C Dia E D Dia A Thread MS25042-8D 8S 16.66 14.27 114.30 4.22 ½-28UNEF-2A MS25042-10D 10S,10SL 16.66 17.45 114.30 4.22 ⅝-24UNEF-2A MS25042-12D 12S,12SL 21.44 20.62 127.00 4.22 ¾-20UNEF-2A MS25042-14D 14,14SL 21.44 23.80 127.00 4.22 ⅞-20UNEF-2A MS25042-16D 16,16SL 21.44 26.97 127.00 4.22 1-20UNEF-2A MS25042-18D 18 21.44 30.15 127.00 4.22 1⅛-18UNEF-2A MS25042-20D 20 21.44 33.32 139.70 5.00 1¼-18UNEF-2A MS25042-22D 22 21.44 36.50 152.40 5.00 1⅜-18UNEF-2A MS25042-24D 24 21.44 39.67 209.55 5.00 1½-18UNEF-2A MS25042-28D 28 21.44 46.02 209.55 5.00 1¾-18UNS-2A MS25042-32D 32 21.44 52.37 209.55 5.79 2-18UNS-2A MS25042-36D 36 21.44 58.72 209.55 5.79 2¼-16UN-2A MS25042-40D 40 21.44 65.07 209.55 5.79 2½-16UN-2A MS25042-44D 44 21.44 71.42 209.55 5.79 2¾-16UN-2A MS25042-48D 48 21.44 77.77 209.55 5.79 3-16UN-2A
Wall Mounting Receptacle Cable Connecting Plug
Straight Plug Straight Plug Port Type Box Mounting Receptacle (MS3102E / MS3102R refer to MS3102A) 90' Angle Plug (MS3108E / MS3108R refer to MS3108A) Shell Size B Min E P K D D1 M +0.79-0.00 O A Thread 8S 9.53 5.97 21.44 3.18 57.15 46.69 14.27 39.67 ½-28UNEF-2B 10S 9.53 5.97 24.61 3.18 57.15 46.69 14.27 39.67 ⅝-24UNEF-2B 10SL 9.53 7.54 24.61 3.18 57.15 46.69 14.27 39.67 ⅝-24UNEF-2B 12S 9.53 7.54 26.97 3.56 57.15 46.69 14.27 39.67 ¾-20UNEF-2B 14S 9.53 10.72 29.36 3.56 57.15 46.69 14.27 39.67 ⅞-20UNEF-2B 16S 15.88 13.89 31.75 3.56 57.15 46.69 14.27 39.67 1-20UNEF-2B 12 15.88 7.54 26.97 3.71 66.68 55.40 19.05 50.80 ¾-20UNEF-2B 14 15.88 10.72 29.36 3.71 66.68 55.40 19.05 50.80 ⅞-20UNEF-2B 16 15.88 13.89 31.75 3.71 66.68 55.40 19.05 50.80 1-20UNEF-2B 18 15.88 15.49 34.14 4.57 68.28 55.40 19.05 50.80 1⅛-18UNS-2B 20 15.88 18.67 37.31 4.57 69.85 55.40 19.05 53.98 1¼-18UNS-2B 22 15.88 18.80 40.49 4.57 69.85 55.40 19.05 53.98 1⅜-18UNS-2B 24 15.88 23.42 43.66 5.16 75.41 55.40 20.62 53.98 1½-18UNS-2B 28 15.88 23.42 50.01 5.16 76.99 55.40 20.62 53.98 1¾-18UNS-2B 32 15.88 31.37 30.96 5.16 76.99 58.98 22.23 55.37 2-18UNS-2B 36 15.88 34.54 62.71 5.16 83.34 58.98 22.23 55.37 2¼-16UN-2B 40 15.88 41.35 69.16 5.16 89.66 61.65 22.23 55.37 2½-16UN-2B
Part Number YH01- YH02- YH03- YH04- YH05- YH06- YH07- YH08- YH09- YH10- YH11- YH12- YH13- YH14- YH15- YH16- YH17- YH18- YH19- YH20- MS3100F,R Coupling End Solder Pot End MS3102F,R Coupling End 8S 8S,10S 8S 10S 10SL 10SL, 12S,12 10S, 10SL Solder Pot End 8S 8S, 10S 10SL, 12S,12 MS3106/ MS3108F,R Coupling End 8S 10SL, 12S,12 Solder Pot End 8S, 10S 10SL, 12S,12 14S,14 12S,12 14S,14 12S,12 14S,14 16S,16 14S,14 16S,16 14S,14 16S,16 18 20 20 22 22 22 24 20 20 28 32 36 40 44 48 10S 10SL 12S,12 14S,14 16S,16 18 Part Number YH21- YH22- YH23- YH24- YH25- YH26- YH27- YH28- YH29- YH30- YH31- YH32- YH33- YH34- YH35- YH36- YH37- YH38- YH39- MS3100F,R Coupling End Solder Pot End MS3102F,R Coupling End Solder Pot End MS3106/ MS3108F,R Coupling End 22 24 28 32 36 40 44 48 Solder Pot End 16S,16 18 16S,16 48 18 20,22 36 22 20,22 24,28 40 24,28 28 32 28 44 32 32 36 32 32 40 36 40 36 24,28 44 40 44 40 20,22 48 48 48 18 18 18 24 24 44 48 44
접속배열표 (Contact Arrangements) 註 ) 1. Pin insert (+ 절연체 ) 의전면에서본것임.(Face view of pin insert shown ; socket view is opposite) 2. 본표에소록되지않은많은내용은별도로문의하여주십시요.
접속배열표 (Contact Arrangements) 註 ) 1. Pin insert (+ 절연체 ) 의전면에서본것임.(Face view of pin insert shown ; socket view is opposite) 2. 본표에소록되지않은많은내용은별도로문의하여주십시요.
접속배열표 (Contact Arrangements) 註 ) 1. Pin insert (+ 절연체 ) 의전면에서본것임.(Face view of pin insert shown ; socket view is opposite) 2. 본표에소록되지않은많은내용은별도로문의하여주십시요.
접속배열표 (Contact Arrangements) 註 ) 1. Pin insert (+ 절연체 ) 의전면에서본것임.(Face view of pin insert shown ; socket view is opposite) 2. 본표에소록되지않은많은내용은별도로문의하여주십시요.
접속배열표 (Contact Arrangements) Service Ratin 註 ) 1. Pin insert (+ 절연체 ) 의전면에서본것임.(Face view of pin insert shown ; socket view is opposite) 2. 본표에소록되지않은많은내용은별도로문의하여주십시요.
절연체회전위치 (ALTERNATE INSERT POSITION Shell Size No.of contact contact rrangements 수량 분류기호 Alternate Positions - 각도 W X Y Z 12 12S-3 2 #16 A 70 145 215 290 14S-2 4 #16 Inst. - 120 240-14S-5 5 #16 Inst. - 110 - - 14S-7 3 #16 A 90 180 270-14S-9 2 #16 A 70 145 215 290 16 16-9 2 #19 A 35 110 250 325 2 #12 16-10 3 #12 A 90 180 240-16-11 2 #12 A 35 110 250 325 16-13 2 #12 A 35 110 250 325 16S-1 7 #16 A 80 - - 280 16S-4 2 #16 D 35 110 250 325 16S-5 3 #16 A 70 145 215 290 16S-6 3 #16 A 90 180 270-16S-8 5 #16 A - 170 265-18 18-1 10 #16 A(B,C,F,G) 70 145 215 290 Inst.(all others) 18-3 2 #12 D 35 110 250 325 18-4 4 #16 D 35 110 250 325 18-5 1 #16 D 80 110 250 280 2 #12 18-8 7 #16 A 70 - - 290 1 #12 18-9 5 #16 Inst. 80 110 250 280 2 #12 18-10 4 #12 A - 120 240-18-11 5 #12 A - 170 265-18-12 6 #16 A 80 - - 280 18-13 3 #12 A 80 110 250 280 1 #8 18-15 4 #12 A - 120 240-18-22 3 #16 D 70 145 215 290 20 20.3 3 #12 D 70 145 215 290 20-4 4 #12 D 45 110 250-20-7 8 #16 A(C-F) 80 110 250 280 D(A,B,G,H) 20-8 4 #16 Inst. 80 110 250 280 2 #8 20-14 3 #12 A 80 110 250 280 2 #8 20-15 7 #12 A 80 - - 280 20-16 7 #16 A 80 110 250 280 2 #12 20-17 1 #16 A 90 180 270-5 #12 20-18 6 #16 A 35 110 250 325 3 #12 20-19 3 #8 A 90 180 270-20-22 3 #16 A 80 110 250 280 3 #8 20-23 2 #8 A 35 110 250 325 20-24 2 #16 A 35 110 250 325 2#8 20-27 14 #16 A 35 110 250 325 20-29 17 #16 A 80 - - 280 22 22-2 3 #8 D 70 145 215 290 22-4 2 #12 A 35 110 250 325 2 #8 22-5 4 #16 D 35 110 250 325 2 #12 22-6 1 #16 D 80 110 250 280 2 #8 22-9 3 #12 E 70 145 215 290 Shell Size No.of contact contact rrangements 수량 분류기호 Alternate Positions - 각도 W X Y Z 22 22-23 8 #12 D(H) 335-250 - A(all others) 22-27 8 #16 D(J) 80-250 280 1 #8 A(all others) 22-28 7 #12 A 80 - - 280 24 24-2 7 #12 D 80 - - 280 24-5 16 #16 A 80 110 250 280 24-6 8 #12 D(A,G,H) 80 110 250 280 A(all others) 24.7 14 #16 A 80 110 250 280 2 #12 24-9 2 #4 A 35 110 250 325 24-10 7 #8 A 80 - - 280 24-11 6 #16 A 35 110 250 325 3 #8 24-12 13 #12 A 80 110 250 280 2 #4 24-20 9 #16 D 80 110 250 280 2 #12 24-22 4 #8 D 45 110 250-24-27 7 #16 E 80 - - 280 24-28 24 #16 inst 80 110 250 280 28 28-1 6 #12 D(A,E,J) 80 3 #8 A(all others) 28-2 12 #16 D 35 110 250 325 2 #12 28-7 2 #4 D 35 110 250 325 28-9 6 #16 80 110 250 280 6 #12 D 28-10 3 #12 D(G) 80 110 250 280 2 #8 A(all othesr) 2 #4 28-11 18 16 A 80 110 250 280 4 #12 28-12 26 #16 A 90 180 270-28-15 26 #16 A 80 110 250 280 28-16 20 #16 A 80 110 250 280 28-17 15 #16 A(A-L),B(R) 80 110 250 280 D(M-P) 28-19 6 #16 A(C,E,G,J,L,L) 80 110 250 280 4 #12 B(H,M),D(A,B) 28-20 4 #16 A 80 110 250 280 10 #12 28-21 37 #16 A 80 110 250 280 28-22 3 #16 D 70 145 215 290 3 #4 32-1 3 #12 E(A) 80 110 250 280 2 #0 D(all others) 32 32-6 16 #16 A 801 110 235 280 2 #12 3 #8 2 #4 32-7 28 #16 Inst.(A,B,h,j) 80 125 235 280 7 #12 A(all others) 32-8 24 #16 A 80 125 235 280 6 #12 32-9 12 #16 D 80 110 250 280 2 #4 32.17 4 #4 D 45 110 250-36 36-4 3 #0 A(B,C) 70 145 215 290 D(A) 36-5 4#0 A - 120 240-36-7 40 #16 A 80 110 250 280
22-10 4 #16 E 35 110 250 325 22-11 2 #16 B 35 110 250 325 22-12 3 #16 D 80 110 250 280 2#8 22-13 1 #16 A(A-D) 35 110 250 325 4 #12 D(E) 22-14 19 #16 A 80 - - 280 22-15 1 #16 A(A-C,E,F) 80 110 250 280 5 #12 E(D) 22-17 8 #16 D(A) 80 110 250 280 1 #12 A(all others) 22-18 8 #16 A(C-E) 80 110 250 280 A(all others) 22-19 18 #16 A 80 110 250 280 22-20 9 #16 A 35 110 250 325 22-22 4 #8 A - 110 250-7 #12 36-8 46 #16 A 80 110 250 280 1 #12 36-9 14 #16 A 80 125 235 280 14 #12 2 #8 1 #4 36-10 48 #16 A 80 125 235 280 36-15 35 #16 D(m) 60 125 245 305 A(all others) 40 40-56 85 #16 A 72 144 216 288 44-1 36 #16 D 65 125 225 310 6 #12 48-5 90 #16 A 65 125 225 310 1 #8 9 #12 註 ) 본표에수록되지않은많은내용은별도로문의하여주십시요.
CONTACT Arrangements & Formation Shell size No.of contacts Environment contactst 20 16 12 8 4 0 Type Shell size No.of contacts contacts 20 16 12 8 4 0 Environment Type Shell size No.of contacts Environment contacts 20 16 12 8 4 0 Type 8S-1 1 1 8S-2 2 2 10S-2 1 1 10SL- 3 10SL- 4 8 SIZE 10 SIZE 3 3 E, R 2 2 E, R 12S-1 2 2 12 SIZE 12S-3 2 2 E, R 12S-4 1 1 12S-5 1 1 E, R 12S- 01 3 3 12-5 1 1 14 SIZE 14S-1 3 3 B, E, R 14S-2 4 4 E, R 14S-3 1 1 14S-4 1 1 14S-5 5 5 B, E, R 14S-6 6 6 B, E, R 14S-7 3 3 B, E, R 14S-9 2 2 1 B, E, R 14-3 1 E, R 16S- 01 8 8 16-9 4 2 2 16 SIZE 16-10 3 3 E, R 16-11 2 E, R 16-12 1 1 E, R 16-13 2 16S-1 7 7 B, E, R 16S-4 2 2 16S-5 3 3 16S-8 5 5 E, R 18 SIZE 18-1 10 10 B, E, R 18-2 3 3 18-3 2 2 18-4 4 4 E, R 18-5 3 1 2 B 18-8 8 7 1 B, E, R 18-9 7 5 2 18-10 4 4 B 18-11 5 6 5 E, R 18-12 6 6 B, E, R 18-16 1 1 18-18 7 5 2 18-19 10 10 B 18-20 5 5 E, R 18-21 3 3 18-01 8 8 20 SIZE 20-2 1 1 20-3 3 3 20-4 4 4 1 E, R 20-7 8 8 B 20-8 6 4 2 20-10 4 2 20-13 13 13 20-15 7 7 B, E, R 20-16 9 7 2 B 20-17 6 1 5 E, R 20-18 9 6 3 B 20-19 3 3 E, R 20-22 6 3 3 20-23 2 2 20-24 4 2 2 20-27 14 14 B, E, R 20-29 17 17 B, E, R 20-01 10 10 20-02 10 8 2 20-03 3 1 2 22 SIZE 22-2 3 3 E, R 22-4 4 2 2 22-5 6 4 2 22-7 1 3 1 E, R 22-8 2 2 22-9 3 3 22-10 4 4 E, R 22-14 19 19 B, E,R 22-15 6 1 5 E, R 22-18 8 8 22-19 14 14 B, E, R 22-22 4 4 B 22-23 8 8 B, E, R 22-27 9 8 1 22-01 12 8 4 22-02 9 9 24 SIZE 24-2 7 7 24-3 7 5 2 24-4 4 3 3 24-5 16 16 24-7 16 14 2 E, R 24-9 2 2 E, R 24-10 7 7 B 24-11 9 6 3 B, E, R 24-12 5 3 2 24-20 11 9 2 24-22 4 4 24-28 24 24 B, E, R 24-01 2 2 24-02 9 9 24-03 12 12 28 SIZE 28-2 14 12 2 28-3 3 3 28-7 2 2 28-9 12 6 6 28-10 7 3 2 2 28-11 22 18 4 B 28-12 26 26 B, E, R 28-15 35 35 B 28-16 20 20 28-17 15 15 28-18 12 12 28-19 10 6 4 28-20 14 4 10 B 28-21 37 37 B, E, R 28-22 6 3 3 E, R 28-51 12 12 28-56 16 14 2 32 SIZE 32-1 5 3 2 32-5 2 2 32-6 23 16 2 3 2 E, R 32-7 35 28 7 32-8 30 24 6 32-13 23 18 5 32-15 8 6 2 32-16 23 16 2 3 2 32-17 4 4 E, R 32-22 54 54 B 32-73 46 46 32-01 24 24 32-02 16 16 32-03 3 3 32-04 7 7 32-05 28 18 8 2 32-59 40 38 2 36 SIZE 36-1 22 18 36-4 3 3 36-5 4 4 36-7 47 40 36-8 47 46 36-9 31 14 14 2 1 36-10 48 48 36-20 34 30 2 2 36-02 27 27 (36-27) 36-52 52 52 40 SIZE 40-56 85 85 MS25183 용