Features - DSC4 Semi-open Impeller Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board pro

Contents Section Page Features 2 Specifications 0 Model Designation 6 Impeller Design 8 Material Specifications 9 Selection Chart 2 Performance Curves 23 Dimension Drawings 4 Quick Discharge Connector 67 Sectional View 68 Motor Data Specifications 76 Electrical Data 77 Cable Data 80 Wiring Diagrams 8 Technical Information Mechanical Seal 83 Cable Entry - Sectional View 85 Thermal Detector 86 Leakage Detector 87 Paint Specifications 89 General 90 www.pumpsebara.com (803) 327-5005 (p) (803) 327-5097 (f) rev. 07/6

Features - DSC4 Semi-open Impeller Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Self cooling system with cooling jacket assures safe operation of motor in air. Float type leakage detector provides early warning of mechanical seal failure. Cartridge type, duplex mechanical seals in tandem arrangement provides easy maintenance and high reliability. Typical Construction (Semi-open Impeller) High efficiency, semi-open impeller accepts large solid dia. www.pumpsebara.com 2 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features - DSC4 Enclosed Impeller Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Self cooling system with cooling jacket assures safe operation of motor in air. Float type leakage detector provides early warning of mechanical seal failure. Cartridge type, duplex mechanical seals in tandem arrangement provides easy maintenance and high reliability. High efficiency, enclosed impeller accepts large solid dia. Replaceable casing ring and optional impeller ring maintains working clearances while reducing maintenance costs Typical Construction (Enclosed Impeller) www.pumpsebara.com 3 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features - DSCA4 Semi-open Impeller Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Self cooling system with cooling jacket assures safe operation of motor in the air. Float type leakage detector provides early warning of mechanical seal failure. Cartridge type, duplex mechanical seals in tandem arrangement provides easy maintenance and high reliability. High efficiency, open impeller accepts large solid dia. Typical Construction (Semi-open Impeller) www.pumpsebara.com 4 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features - DSCA4 Enclosed Impeller Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Self cooling system with cooling jacket assures safe operation of motor in the air. Float type leakage detector provides early warning of mechanical seal failure. Cartridge type, duplex mechanical seals in tandem arrangement provides easy maintenance and high reliability. High efficiency, enclosed impeller accepts large solid dia. Replaceable casing ring and optional impeller ring maintains working clearances while reducing maintenance costs Typical Construction (Enclosed Impeller) www.pumpsebara.com 5 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features - DSC4C - 4P/6P 50-45HP Models Semi-open Impeller (ICS option) Typical Construction (Semi-open Impeller) www.pumpsebara.com 6 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features - DSC4C - 4P/6P 50-45HP Models Enclosed Impeller (ICS option) Typical Construction (Enclosed Impeller) www.pumpsebara.com 7 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Features DSCA4C 4P/6P 50-45HP Models Semi-open Impeller (ICS option) Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Internal cooling system assures safe operation of motor in the air without utilizing pumped liquid as coolant. Float type leakage detector warns mechanical seal failure. Duplex mechanical seals in tandem arrangement prevent pumped liquid leakage to the coolant chamber, and coolant leakage to the motor side. An impeller between the seals circulates coolant through channels to t he cooling jacket around the motor. Heat generated by the motor is transferred to the coolant and dissipated to the pumped liquid via a heat exchanger (side plate). High efficiency, open impeller accepts large solid dia. Typical Construction (Semi-open Impeller) www.pumpsebara.com 8 (803) 327-5005 (p) (803) 327-5097 (f) rev. 07/6

Features DSCA4C 4P/6P 50-45HP Models Enclosed Impeller (ICS option) Watertight cable entry system assures safe operation without water leakage into terminal casing. Terminal board provides easy connecting of cable. High efficiency, compact designed motor with thermal detector for each phase of winding. Internal cooling system assures safe operation of motor in the air without utilizing pumped liquid as coolant. Float type leakage detector warns mechanical seal failure. Duplex mechanical seals in tandem arrangement prevent pumped liquid leakage to the coolant chamber, and coolant leakage to the motor side. An impeller between the seals circulates coolant through channels to the cooling jacket around the motor. Heat generated by the motor is transferred to the coolant and dissipated to the pumped liquid via a heat exchanger (side plate). High efficiency, close impeller accepts large solid dia. Typical Construction (Enclosed Impeller) www.pumpsebara.com 9 (803) 327-5005 (p) (803) 327-5097 (f) rev. 07/6

Standard Specifications Standard SpecificationS optional Design Capacity 530 to 2500 USGPM (2 to 48 m 3 /min) Total head 2 to 300 ft (3.8 to 9 m) Liquid temp. 32 F to 04 F (0 to 40 C) Max. submergence 4 ft (35 m) Materials Casing Cast Iron Impeller Cast Iron Casing Ring 420 Stainless Steel (enclosed impeller models) Shaft 420 Stainless Steel (4P/6P 50-45HP models) 403Q Stainless Steel (4P/6P/8P 75-245HP, 0P 50-45HP models) Motor Frame Cast Iron Cooling Jacket Steel Fasteners 304 Stainless Steel Construction Impeller Semi-open/Enclosed Impeller ring (enclosed impeller models) Shaft seal Cartridge type duplex mechanical seals Consult factory for optional in tandem arrangement seal material Upper: Carbon/Ceramic Lower: Silicon Carbide/Silicon Carbide Bearing Grease lubricated ball bearing Motor Air filled water tight electric motor FM Explosion proof Class, with cooling jacket Group C, D Starting method: D.O.L. 60 Hz, 460V Built-in winding temperature detector Built-in float type leak detector Temp. detector for thrust bearing Mounting method Wet Pit: Quick discharge connector (QDC) Dry Pit: with baseplate Cooling System Pumpage re-circulation Internal Cooling System (ICS) Coolant: Propylen glycol solution 4P/6P 50-45HP models Accessories 50 ft (5.24 m) water tight rubber insulated flexible cable Consult factory for additional cable lengths www.pumpsebara.com 0 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

EBARA Submersible Non-clog Sewage/Wastewater Pumps Specifications DSC4/DSC4C www.pumpsebara.com (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Specifications DSC4/DSC4CProject: Model: Chk d: Date: www.pumpsebara.com 2 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Specifications DSC4/DSC4C Project: Model: Chk d: Date: www.pumpsebara.com 3 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Specifications DSCA4/DSCA4C A. General: Provide FM explosion proof dry pit submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 4 feet. Pump system design shall include permanently mounted suction elbow on which the pump/motor unit is mounted. The motor and pump shall be designed, manufactured, and assembled by the same manufacturer. B. Manufacturer: Ebara International Corporation C. Pump Characteristics: Pumps shall conform to the following requirements: Number of units Design flow (gpm) Design TDH (ft) Minimum shut off head (ft) RPM Maximum HP Minimum hydraulic efficiency at design (%) Voltage/HZ 460V / 60 Phase 3 D. Pump Construction: All major parts of the pumping unit(s) including casing, intermediate casing, impeller, motor frame, suction elbow shall be manufactured from gray cast iron, ASTM A-48 Class 35. Castings shall have smooth surfaces devoid of blow holes or other casting irregularities. Casing design shall be centerline discharge with a large radius on the cut water to prevent clogging. Units shall be furnished with suction and discharge elbows with 25 lb. flat face ANSI flange. All exposed bolts and nuts shall be 304 stainless steel. All mating surfaces of major components shall be machined and fitted with NBR o-rings where watertight sealing is required. Machining and fitting shall be such that sealing is accomplished by automatic compression of o-rings in two planes and o-ring contact is made on four surfaces without the requirement of specific torque limits. Surfaces in contact with the pumpage shall be surface prepared to SSPC-SP-0 and coated with two (2) coats of coal tar epoxy paint. The internal surface of the motor shall be surface prepared to SSPC-SP-3 and coated with one () coat of zinc rich primer paint. Exposed surfaces shall be surface prepared to SSPC-SP-0 and coated with one () coat of zinc chromate primer and one (2) coats of coal tar epoxy paint.. Impellers a. The impeller shall be a non-clog, enclosed, multi-vane mixed flow type. It shall be balanced and shall be designed for solids handling with a long thrulet without acute turns. The inlet edge of the impeller vanes shall be angled toward the impeller periphery so as to facilitate the release of objects that might otherwise clog the pump. The design shall also include back pump out vanes to reduce the pressure and entry of foreign materials into the mechanical seal area. Impellers shall be direct connected to the motor shaft with a slip fit, key driven, and secured with an impeller nut. A replaceable casing ring shall be provided, manufactured of AISI 420SS material, to maintain working clearances and hydraulic efficiencies. The design shall include an optional, replaceable impeller ring manufactured of SS material to maintain working clearances and hydraulic efficiencies. b. The impeller shall be a mixed flow multi-vane semi-open design. It shall be balanced and shall be designed for solids handling with a long thrulet without acute turns. The inlet edge of the impeller vanes shall be angled toward the impeller periphery so as to facilitate the release of objects that might otherwise clog the pump. The design shall also include back pump out vanes to reduce the pressure and entry of foreign materials into the mechanical seal area. Impellers shall be direct connected to the motor shaft with a slip fit, key driven and secured with an impeller bolt. The design shall include a replaceable cast iron suction cover. The suction cover shall be designed such that it may be adjusted to maintain working clearances and hydraulic efficiencies. 2. Mechanical Seals The mechanical seal system shall be a cartridge mounted double mechanical seal in a tandem arrangement. Each seal shall be positively driven and act independently with its own spring system. The upper seal operates in an oil bath, while the lower seal is lubricated by the oil from between the shaft and www.pumpsebara.com 4 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Specifications DSCA4/DSCA4CProject: Model: Chk d: Date: the seal faces, and in contact with the pumpage on the outside. The oil filled seal chamber shall be designed to prevent over-filling and include an anti-vortexing vane to insure proper lubrication of both seal faces. Lower face materials shall be Silicon Carbide, upper faces carbon vs. ceramic. NBR elastomers shall be provided in the oil chamber and viton elastomers where in contact with the pumpage. The mechanical seal hardware shall be 304SS. Seal system shall not rely on pumping medium for lubrication. E. Motor Construction: The pump motor shall be FM Explosion Proof, Class, Division, Groups C, D. The design shall be an air filled induction type with a squirrel cage rotor, shell type design, built to NEMA MG-, Design B specifications. Stator windings shall be copper, insulated with moisture resistant Class H insulation, rated for 356 F. The stator shall be dipped and baked three times in Class H varnish and heat shrunk fitted into the stator housing. Rotor bars and short circuit rings shall be manufactured of cast aluminum. The motor junction area shall include a terminal strip for wire connections and shall be sealed with gaskets and o- rings from the motor stator housing. The motor shaft shall be one piece ANSI420SS for 4 pole and 6 pole 50hp to 45hp, ANSI403Q for 4 pole, 6 pole, and 8 pole 75hp to 245hp and 0 pole 50hp to 45hp, rotating on two permanently lubricated ball bearings designed for a minimum B-0 life of up to 00,000 hours. Motor service factor shall be.5 and capable of up to 5 starts per hour. The motor shall be designed for continuous duty pumping at a maximum sump temperature of 04 F. Voltage and frequency tolerances shall be a maximum 0 / 5% respectively. A thrust bearing RTD temperature monitor shall be provided. (Thrust bearing RTD is optional) Motor over temperature protection shall be provided by three miniature thermal protectors (one per phase) embedded in the windings. Mechanical seal failure protection shall be provided by a mechanical float switch located in a chamber above the seal. This switch shall be comprised of a magnetic float that actuates a dry reed switch encapsulated within the stem. Should the mechanical seal fail, liquid shall be directed into the float chamber, in which the rising liquid activates the switch opening the normally closed circuit. The float switch components shall be 36SS material. The motor shall be non-overloading over the entire specified range of operation and be able to operate at full load continuously with the motor unsubmerged. Power cable jacket shall be manufactured of an oil resistant chloroprene rubber material, designed for submerged applications. Cable shall be watertight to a depth of a least 4. The cable entry system shall comprise of primary, secondary, and tertiary sealing methods. The primary seal shall be achieved by a cylindrical elastomeric grommet compressed between the cable housing and cable gland. Secondary sealing is accomplished with a compressed o-rings made of NBR material. Compression and subsequent sealing shall preclude specific torque requirements. The system shall also include tertiary sealing to prevent leakage into the motor housing due to capillary action through the insulation if the cable is damaged or cut. The cable wires shall be cut, stripped, re-connected with a copper butt end connector, and embedded in epoxy within the cable gland. This provides a dead end for leakage through the cable insulation into the motor junction area. The cable entry system shall be the same for both the power and control cables. Cooling a. The motor design shall also include an integral cooling jacket constructed of steel, A283, Grade D. The cooling medium shall be the pumpage. Re-circulation through the jacket shall be achieved by discharging the pumpage into the cooling jacket from the periphery, high pressure area, of the impeller, and returning it into the low pressure behind the impeller, at the hub. Riser pipes within the jacket shall be utilized to facilitate circulation. The cooling passage ways shall be non-clogging by virtue of the dimensions; screening solids from entering the jacket. The jacket shall have external NPT connections to be used for external cooling as an option, as well as for venting the jacket. The jacket cooling system shall provide heat dissipation for the motor whether the unit is submerged or operating in air. b. The motor design shall include a propylene glycol closed loop integral cooling system. The system shall consist of a steel cooling jacket. An impeller, integral to the cooling system and driven by the pump shaft, shall provide the necessary circulation of the cooling liquid through the jacket. The coolant shall be cooled using a heat exchanger mounted in the base of the motor housing. The jacket cooling system shall provide heat dissipation for the motor whether the unit is submerged or operating in air. www.pumpsebara.com 5 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Model Designation Project: Model: 200 50 DSC4 A O Chk d: FM 4 Date: 6 075 SuCTION BORE SIZE mm 200mm 8" 500mm 20" 400mm 6" 600mm 24" DISCHARGE BORE SIZE mm 50mm 6" 400mm 6" 250mm 0" 500mm 20" 300mm 2" MODEL TYPE DSC4 submersible sewage pump: wet pit DSCA4 submersible sewage pump: dry pit DSC4C - submersible sewage pump: wet pit (ICS) DSCA4C - submersible sewage pump: dry pit (ICS) MODEL CODE HYDRAuLIC MODEL IMPELLER TYPE O Semi-open C Enclosed FM FM Explosion proof POLE 4 800 RPM 8 900 RPM 6 200 RPM 0 720 RPM HERTZ 6 60Hz HORSEPOWER 050 50HP 20 20HP 25 25HP 060 60HP 45 45HP 245 245HP 075 75HP 75 75HP 00 00HP 200 200HP Discharge bore Discharge bore Suction bore Model DSC4(C) Wet Pit Installation Model DSCA4(C) Dry Pit Installation www.pumpsebara.com 6 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Configurations MODEL DSC4(C) (WET PIT INSTALLATION) MODEL DSCA4(C) (DRY PIT INSTALLATION) www.pumpsebara.com 7 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Specifications Impeller Design Pump Model Model Code Impeller Type No. of Vanes ICS Opt. AC-46050 AC-46060 50DSC4 200x50DSCA4 250DSC4 400x250DSCA4 300DSC4 400x300DSCA4 400DSC4 500x400DSCA4 500DSC4 600x500DSCA4 AC-46075 BC-4600 BC-4620 CC-4620 CC-4645 CC-4675 CC-4675 CC-46200 CC-4625 CC-46245 HC-46050 HC-46060 HC-46075 EC-6600 EC-6620 EC-6645 FC-66050 FC-66060 GC-66075 EEC-6675 EEC-66200 EEC-6625 EEC-66245 DC-06050 DC-06060 DC-06075 D2C-0600 GC-0620 GC-0645 G2C-8675 G2C-86200 G2C-8625 G2C-86245 Enclosed 2 3 Y N Y N Pump Model Model Code Impeller Type No. of Vanes ICS Opt. AO-46050 50DSC4 200x50DSCA4 250DSC4 400x250DSCA4 300DSC4 400x300DSCA4 AO-46060 AO-46075 HO-46050 HO-46060 HO-46075 EO-6600 EO-6620 EO-6645 FO-66050 FO-66060 GO-66075 Semi-open www.pumpsebara.com 8 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6 2 3 Y

Material Specifications DSC4 PARTS MATERIAL Pump casing QDC Cast iron ASTM A48 CL35 Impeller 3 Cast iron ASTM A48 CL35 Shaft Casing ring Stainless Steel AISI 420 (4P/6P 50-45HP models) AISI 403Q (4P/6P/8P 75-245HP, 0P 50-45HP models) Stainless Steel AISI 420 Suction Cover 2 Cast Iron ASTM A48 CL35 Motor Frame Cast iron ASTM A48 CL35 Cooling jacket Rolled steel ASTM A283 Gr.D Mechanical Seal Lifting Handle Upper: Carbon/Ceramic Lower: Silicon Carbide/Silicon Carbide Stainless Steel Note: Enclosed impeller models only 2 Semi-open impeller models only 3 Optional 304 SS Impeller ring available for enclosed impeller models www.pumpsebara.com 9 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Material Specifications DSC4C 4P/6P 50-45HP Models www.pumpsebara.com 20 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Selection Chart Selection Chart (Ft) 300 250 (m) 00 CC-4675 CC-46245 200 50 00 50 HC-46075 HC-46060 HC-46050 CC-4625 CC-46200 CC-4645 BC-4620 BC-4600 CC- 4675- C EEC-66245 EEC- 66200 EEC- 6675 EEC-6625 TOTAL HEAD 50 40 30 0 AC-46075 AC-46060 AC-46050 EC-6645 EC-6620 EC-6600 GC-66075 FC-66060 FC-66050 GC- 0645 GC- 0620 D2C- 0600 DC- 06075 G2C- 86245 G2C- 86200 G2C- 8675 G2C- 8625 20 5 DC- 06060 DC- 06050 0 3 5 0 50 00 (m 3 /min) 0.5. 5 2 3 4 5 0 5 0 3 (USGPM CAPACITY Please note: Selection chart shows curves for the DSC4 enclosed impeller model. Please reference individual curve for impeller performance of semi-open impeller models. www.pumpsebara.com 2 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: Rated Capacity Rated Total Head Pump Speed Motor Output Power MODEL: 250DSC4 400 250DSCA4 00HP - 45HP TOTAL HEAD (ft) 40 20 00 80 60 40 20 GPM FT RPM HP ( 3800 ) ( 00 ) 800 ( 45 ) sample CAUTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 0 000 2000 3000 4000 5000 6000 7000 8000 9000 60 60 65 70 Pump Eff. (%) 75 80 82 83 84 CAPACITY (gal/min) 83 82 Semi-open Impeller 80 75 70 65 429 mm 42 mm 394 mm 379 mm PUMP POWER (hp) 40 20 00 80 60 40 429 mm 42 mm 394 mm 379 mm 20 0 0 000 2000 3000 4000 5000 6000 7000 8000 9000 CAPACITY (gal/min) www.pumpsebara.com 22 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: AO Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C 50HP - 75HP 200 GPM FT RPM HP 800 Semi-open Impeller 80 60 55 60 Pump Eff. (%) 65 70 40 73 75 TOTAL HEAD (ft) 20 00 80 77 * 75 73 70 65 60 60 55 330 mm 32 mm 40 284 mm 294 mm PUMP POWER (hp) 20 0 80 70 60 50 40 30 20 0 0 CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 500 000 500 2000 2500 3000 CAPACITY (gal/min) 0 500 000 500 2000 2500 3000 CAPACITY (gal/min) 284 mm 294 mm 32 mm 330 mm www.pumpsebara.com 23 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: AC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C 50HP - 75HP GPM FT RPM HP 800 Enclosed Impeller www.pumpsebara.com 24 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: BC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C 00HP - 20HP 250 GPM FT RPM HP 800 Enclosed Impeller 200 60 Pump Eff. (%) 65 70 73 75 76 * TOTAL HEAD (ft) 50 75 73 70 65 60 00 55 360 mm 340 mm 38 mm 50 CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 40 20 0 500 000 500 2000 2500 3000 3500 CAPACITY (gal/min) 360 mm PUMP POWER (hp) 00 80 60 40 20 38 mm 340 mm 0 0 500 000 500 2000 2500 3000 3500 CAPACITY (gal/min) www.pumpsebara.com 25 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: CC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C GPM FT RPM HP 20HP - 75HP* 800 Enclosed Impeller *Note: 75HP Model is not availablein ICS www.pumpsebara.com 26 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: CC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4 200 50DSCA4 75HP - 245HP GPM FT RPM HP 800 Enclosed Impeller www.pumpsebara.com 27 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: EO Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 250DSC4/DSC4C 400 250DSCA4/DSCA4C 00HP - 45HP 40 GPM FT RPM HP 200 Semi-open Impeller 20 60 65 70 Pump Eff. (%) 75 00 80 82 83 84 TOTAL HEAD (ft) 80 83 82 80 75 60 70 65 40 429 mm 42 mm 394 mm 379 mm 20 CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 0 000 2000 3000 4000 5000 6000 7000 8000 9000 60 CAPACITY (gal/min) PUMP POWER (hp) 40 20 00 80 60 40 429 mm 42 mm 394 mm 379 mm 20 0 0 000 2000 3000 4000 5000 6000 7000 8000 9000 CAPACITY (gal/min) www.pumpsebara.com 28 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: EC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 250DSC4/DSC4C 400 250DSCA4/DSCA4C 00HP - 45HP GPM FT RPM HP 200 Enclosed Impeller www.pumpsebara.com 29 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: FO Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 300DSC4/DSC4C 400 300DSCA4/DSCA4C 50HP - 60HP 90 GPM FT RPM HP 200 Semi-open Impeller 80 70 60 65 70 Pump Eff. (%) 75 60 80 83 85 TOTAL HEAD (ft) 50 40 87 * 85 83 80 75 30 70 65 20 0 306 mm CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 0 000 2000 3000 4000 5000 6000 7000 60 CAPACITY (gal/min) 332 mm 346 mm PUMP POWER (hp) 50 40 30 20 0 306 mm 332 mm 346 mm 0 0 000 2000 3000 4000 5000 6000 7000 CAPACITY (gal/min) www.pumpsebara.com 30 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: FC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 300DSC4/DSC4C 400 300DSCA4/DSCA4C 50HP - 60HP GPM FT RPM HP 200 Enclosed Impeller www.pumpsebara.com 3 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: GO Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 300DSC4/DSC4C 400 300DSCA4/DSCA4C 75HP 90 GPM FT RPM HP 200 Semi-open Impeller 80 70 60 65 70 75 80 60 84 87 TOTAL HEAD (ft) 50 87 40 84 80 30 75 70 65 20 332 mm 0 CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 37 mm 359 mm 0 0 000 2000 3000 4000 5000 6000 7000 8000 CAPACITY (gal/min) 80 70 PUMP POWER (hp) 60 50 40 30 20 37 mm 332 mm 359 mm 0 0 0 000 2000 3000 4000 5000 6000 7000 8000 CAPACITY (gal/min) www.pumpsebara.com 32 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: GC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 300DSC4/DSC4C 400 300DSCA4/DSCA4C 75HP GPM FT RPM HP 200 Enclosed Impeller www.pumpsebara.com 33 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: EEC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 300DSC4 400 300DSCA4 75HP - 245HP GPM FT RPM HP 200 Enclosed Impeller www.pumpsebara.com 34 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: DC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 400DSC4 500 400DSCA4 50HP - 75HP GPM FT RPM HP 720 Enclosed Impeller www.pumpsebara.com 35 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: D2C Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 500DSC4 600 500DSCA4 00HP GPM FT RPM HP 720 Enclosed Impeller www.pumpsebara.com 36 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: GC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 500DSC4 600 500DSCA4 20HP - 45HP GPM FT RPM HP 720 Enclosed Impeller www.pumpsebara.com 37 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: G2C Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 500DSC4 600 500DSCA4 75HP - 245HP GPM FT RPM HP 900 Enclosed Impeller www.pumpsebara.com 38 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Performance Curves MODEL CODE: HO Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C 50HP - 75HP 250 GPM FT RPM HP 800 Semi-open Impeller 200 45 50 55 Pump Eff. (%) 60 65 68 TOTAL HEAD (ft) 50 70 7 * 70 68 00 65 60 55 364 mm 50 303 mm 324 mm 343 mm CAuTION : Please contact the factory for a duty point on the dashed portion of the performance curve. 0 80 70 0 500 000 500 2000 2500 CAPACITY (gal/min) 364 mm PUMP POWER (hp) 60 50 40 30 20 0 303 mm 324 mm 343 mm 0 0 500 000 500 2000 2500 CAPACITY (gal/min) www.pumpsebara.com 39 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Performance Curves MODEL CODE: HC Project: GPM: TDH: EFF: HP: Chk d: Date: MODEL: 50DSC4/DSC4C 200 50DSCA4/DSCA4C 50HP - 75HP GPM FT RPM HP 800 Enclosed Impeller www.pumpsebara.com 40 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 50DSC4/DSC4C Model Code AO(C)* with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC AO(C)-46050 50 8 AO(C)-46060 60 877 243 AO(C)-46075 75 987 Unit: kg Model kw Pump QDC AO(C)-46050 37 822 AO(C)-46060 45 952 0 AO(C)-46075 55 90 2'' (50 mm) D D2 d T Flange Detail n ø h D D2 T n h 9 /2 8 7/8 D D2 T n h 279.4 24.3 25.4 8 23 Model HP d A B B2 C E F G H I J AO(C)-46050 50 AO(C)-46060 60 6 44 /2 4 3/6 4 3/6 28 3/4 5 7/8 4 5/6 3 /2 8 7/8 6 5/6 3 /8 AO(C)-46075 75 Model HP K L M N P V X Y Z q d2 AO(C)-46050 50 57 /8 AO(C)-46060 60 5 /6 3/6 22 3/6 8 /2 59 /2 7 /6 5 3/4 5 3/8 6 5/6 3 AO(C)-46075 75 6 /6 Model kw d A B B2 C E F G H I J AO(C)-46050 37 AO(C)-46060 45 50 30 360 360 730 50 0 89. 225 45 333 AO(C)-46075 55 Model kw K L M N P V X Y Z q d2 AO(C)-46050 37 45 AO(C)-46060 45 45 20 580 470 5 450 400 390 60 24 75 AO(C)-46075 55 55 Notes: *AO = Semi-open impeller model; AC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 4 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 50DSC4/DSC4C Model Code BC with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC BC-4600 00 285 243 BC-4620 20 2776 Unit: kg Model kw Pump QDC BC-4600 75 99 BC-4620 90 259 0 2'' (50 mm) D D2 d T Flange Detail n ø h D D2 T n h 9 /2 8 7/8 D D2 T n h 279.4 24.3 25.4 8 23 Model HP d A B B2 C E F G H I J BC-4600 00 44 /2 4 3/6 4 3/6 6 BC-4620 20 45 /4 4 5/6 4 5/6 28 3/4 5 7/8 4 5/6 3 /2 8 7/8 6 5/6 3 /8 Model HP K L M N P V X Y Z q d2 BC-4600 00 3/6 64 3/6 5 /6 22 3/6 8 /2 7 /6 5 3/4 5 3/8 6 5/6 3 BC-4620 20 3/6 67 3/8 mm Model kw d A B B2 C E F G H I J BC-4600 75 30 360 360 50 BC-4620 90 50 380 380 730 50 0 89. 225 45 333 Model kw K L M N P V X Y Z q d2 BC-4600 75 20 63 45 580 470 450 400 390 60 24 75 BC-4620 90 30 72 Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 42 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 50DSC4/DSC4C* Model Code CC with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. *75HP Model is not available in ICS. www.pumpsebara.com 43 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 50DSC4 Model Code CC with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 44 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 250DSC4/DSC4C Model Code EO(C)* with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC EO(C)-6600 00 3354 EO(C)-6620 20 3393 375 EO(C)-6645 45 367 Unit: kg Model kw Pump QDC EO(C)-6600 75 52 EO(C)-6620 90 539 70 EO(C)-6645 0 640 2'' (50 mm) D D2 d T Flange Detail n ø h D D2 T n h 6 4 /4 3/6 2 D D2 T n h 406.4 362 30.3 2 26 Model HP d A B B2 C E F G H I J EO(C)-6600 00 EO(C)-6620 20 0 55 /2 9 5/6 5 3/8 35 5/8 8 7/6 4 5/6 3 /2 7/6 22 3/6 7 5/8 EO(C)-6645 45 Model HP K L M N P V X Y Z q d2 EO(C)-6600 00 73 /6 EO(C)-6620 20 8 /4 3/6 24 3/6 2 5/8 75 /6 7 /6 7 /6 8 /2 6 5/6 3 EO(C)-6645 45 78 3/6 Model kw d A B B2 C E F G H I J EO(C)-6600 75 EO(C)-6620 90 250 40 490 390 905 25 0 89. 290 580 448 EO(C)-6645 0 Model kw K L M N P V X Y Z q d2 EO(C)-6600 75 872 EO(C)-6620 90 20 30 630 550 922 450 450 470 60 24 75 EO(C)-6645 0 2002 Notes: *EO = Semi-open impeller model; EC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 45 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 300DSC4/DSC4C Model Code FO(C)* with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC FO(C)-66050 50 2279 FO(C)-66060 60 2560 507 Unit: kg Model kw Pump QDC FO(C)-66050 37 034 FO(C)-66060 45 6 230 2'' (50 mm) D D2 d T n ø h Flange Detail D D2 T n h 9 7 /4 2 D D2 T n h 482.6 43.8 3.8 2 26 Model HP d A B B2 C E F G H I J FO(C)-66050 50 2 53 /4 7 /6 3 3/4 34 7/6 0 /4 4 5/6 3 /2 3 26 9 3/6 FO(C)-66060 60 Model HP K L M N P V X Y Z q d2 FO(C)-66050 50 64 3/6 9 3/6 3/6 26 3/4 22 7/6 7 /6 9 /6 9 5/6 6 5/6 3 FO(C)-66060 60 66 3/8 Model kw d A B B2 C E F G H I J FO(C)-66050 37 300 350 450 350 875 260 0 89. 330 660 503 FO(C)-66060 45 Model kw K L M N P V X Y Z q d2 FO(C)-66050 37 646 250 20 680 570 450 500 490 60 24 75 FO(C)-66060 45 686 Notes: *FO = Semi-open impeller model; FC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 46 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 300DSC4/DSC4C Model Code GO(C)* with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC GO(C)-66075 75 39 508 Unit: kg Model kw Pump QDC GO(C)-66075 55 45 230 2'' (50 mm) D D2 d T Flange Detail n ø h D D2 T n h 9 7 /4 2 D D2 T n h 482.6 43.8 3.8 2 26 Model HP d A B B2 C E F G H I J GO(C)-66075 75 2 54 3/4 8 /2 4 5/6 35 /6 0 /4 4 5/6 3 /2 3 26 9 3/6 Model HP K L M N P V X Y Z q d2 GO(C)-66075 75 9 3/6 3/6 26 3/4 22 7/6 7 3/4 7 /6 9 /6 9 5/6 6 5/6 3 Model kw d A B B2 C E F G H I J GO(C)-66075 55 300 390 470 380 890 260 0 89. 330 660 503 Model kw K L M N P V X Y Z q d2 GO(C)-66075 55 250 30 680 570 822 450 500 490 60 24 75 Notes: *GO = Semi-open impeller model; GC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 47 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 300DSC4 Model Code EEC with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 48 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 400DSC4 Model Code DC with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 49 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 500DSC4 Model Code D2C with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 50 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 500DSC4 Model Code GC with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 5 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 500DSC4 Model Code G2C with Quick Discharge Connector Weights Unit: lbs. Unit: kg 2'' (50 mm) Flange Detail Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 52 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 50DSC4/DSC4C Model Code HO(C)* with Quick Discharge Connector Weights Unit: lbs. Model HP Pump QDC HO(C)-46050 50 904 HO(C)-46060 60 970 243 HO(C)-46075 75 2080 Unit: kg Model kw Pump QDC HO(C)-46050 37 864 HO(C)-46060 45 894 0 HO(C)-46075 55 944 2'' (50 mm) D D2 d T Flange Detail n ø h D D2 T n h 9 /2 8 7/8 D D2 T n h 279.4 24.3 25.4 8 23 Model HP d A B B2 C E F G H I J HO(C)-46050 50 HO(C)-46060 60 6 44 /2 4 3/6 4 3/6 28 3/4 5 7/8 4 5/6 3 /2 8 7/8 6 5/6 3 /8 HO(C)-46075 75 Model HP K L M N P V X Y Z q d2 HO(C)-46050 50 57 5/6 HO(C)-46060 60 5 /6 3/6 22 3/6 8 /2 60 /4 7 /6 5 3/4 5 3/8 6 5/6 3 HO(C)-46075 75 6 7/8 Model kw d A B B2 C E F G H I J HO(C)-46050 37 HO(C)-46060 45 50 30 360 360 730 50 0 89. 225 45 333 HO(C)-46075 55 Model kw K L M N P V X Y Z q d2 HO(C)-46050 37 47 HO(C)-46060 45 45 20 580 470 53 450 400 390 60 24 75 HO(C)-46075 55 57 Notes: *HO = Semi-open impeller model; HC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables, and does not include the weight of the guide pipes and the water in pump. www.pumpsebara.com 53 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 200 50DSCA4/DSCA4C Model Code AO(C)* Drypit Application Weights Unit: lbs. Model HP W W2 W3 W4 AO(C)-46050 50 203 265 AO(C)-46060 60 2087 220 463 287 AO(C)-46075 75 2208 287 Unit: kg Model kw W W2 W3 W4 AO(C)-46050 37 92 20 AO(C)-46060 45 95 00 20 30 AO(C)-46075 55 002 30 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight 2'' (50 mm) Suction Flange Ds Ds2 T n h 3 /2 3/4 8 7/8 Ds Ds2 T n h 342.9 298.4 28.5 8 23 Discharge Flange Dd Dd2 n2 9 /2 8 Model HP K K2 L M R S V AO(C)-46050 50 AO(C)-46060 60 3 3/4 3 3/4 3/6 25 3/6 29 5/6 27 9/6 7 /6 AO(C)-46075 75 Model kw d d2 C E F G H I AO(C)-46050 37 306 AO(C)-46060 45 200 50 366 36 540 62 450 450 AO(C)-46075 55 406 Model kw K K2 L M R S V AO(C)-46050 37 AO(C)-46060 45 350 350 20 640 760 700 450 AO(C)-46075 55 Notes: *AO = Semi-open impeller model; AC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables. m 3/4 0UNC Dd Dd2 n2 m 280 24.3 8 3/4 0UNC Model HP d d2 C E F G H I AO(C)-46050 50 5 /2 AO(C)-46060 60 8 6 53 3/4 2 7/6 2 /4 24 /2 7 /6 7 /6 AO(C)-46075 75 55 /4 www.pumpsebara.com 54 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 200 50DSCA4/DSCA4C Model Code BC Drypit Application Weights Unit: lbs. Unit: lbs. Model HP W W2 W3 W4 BC-4600 00 2450 BC-4620 20 3040 220 463 287 Unit: kg Unit: kg Model kw W W2 W3 W4 BC-4600 75 BC-4620 90 379 00 20 30 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight 2'' (50 mm) Suction Flange Ds Ds2 T n h 3 /2 3/4 8 7/8 Ds Ds2 T n h 342.9 298.4 28.5 8 23 Discharge Flange Dd Dd2 n2 9 /2 8 Model HP K K2 L M R S V BC-4600 00 3/6 3 3/4 3 3/4 25 3/6 29 5/6 27 9/6 7 /6 BC-4620 20 3/6 Model kw d d2 C E F G H I BC-4600 75 486 200 50 BC-4620 90 567 36 540 62 450 450 Model kw K K2 L M R S V BC-4600 75 20 350 350 640 760 700 450 BC-4620 90 30 m 3/4 0UNC Dd Dd2 n2 m 280 24.3 8 3/4 0UNC Model HP d d2 C E F G H I BC-4600 00 58 /2 8 6 BC-4620 20 6 /6 2 7/6 2 /4 24 7/6 7 /6 7 /6 Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 55 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 200 50DSCA4/DSCA4C Model Code CC Drypit Application Weights Unit: lbs. Unit: kg 2'' (50 mm) Suction Flange Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. *75HP Model is not available in ICS. www.pumpsebara.com 56 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 200 50DSCA4 Model Code CC Drypit Application Weights Unit: lbs. Unit: kg Suction Flange 2'' (50 mm) Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 57 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 400 250DSCA4/DSCA4C Model Code EO(C)* Drypit Application Weights Unit: lbs. Model HP W W2 W3 W4 EO(C)-6600 00 368 728 EO(C)-6620 20 3658 529 794 705 EO(C)-6645 45 3882 705 Unit: kg Model kw W W2 W3 W4 EO(C)-6600 75 64 330 EO(C)-6620 90 659 240 360 320 EO(C)-6645 0 76 320 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight 2'' (50 mm) Suction Flange Ds Ds2 T n h 23 /2 2 /4 7/6 6 Ds Ds2 T n h 596.9 539.8 36.6 6 29 Discharge Flange Dd Dd2 n2 6 4 /4 2 Dd Dd2 n2 406 362 2 Model HP d d2 C E F G H I EO(C)-6600 00 65 7/6 EO(C)-6620 20 6 0 67 3/8 6 3/4 25 /4 40 3/8 29 /2 23 5/8 EO(C)-6645 45 70 9/6 Model HP K K2 L M R S V EO(C)-6600 00 EO(C)-6620 20 9 /6 9 /6 3/6 3 /8 4 3/4 33 7/6 7 /6 EO(C)-6645 45 Model kw d d2 C E F G H I EO(C)-6600 75 662 EO(C)-6620 90 400 250 72 426 640 026 750 600 EO(C)-6645 0 792 Model kw K K2 L M R S V EO(C)-6600 75 EO(C)-6620 90 500 500 30 790 060 850 450 EO(C)-6645 0 Notes: *EO = Semi-open impeller model; EC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables. m 7/8 9UNC m 7/8 9UNC www.pumpsebara.com 58 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 400 300DSCA4/DSCA4C Model Code FO(C)* Drypit Application Weights Unit: lbs. Model HP W W2 W3 W4 FO(C)-66050 50 2500 529 794 66 FO(C)-66060 60 278 Unit: kg Model kw W W2 W3 W4 FO(C)-66050 37 34 FO(C)-66060 45 26 240 360 300 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight Suction Flange Ds Ds2 T n h 23 /2 2 /4 7/6 6 Ds Ds2 T n h 596.9 539.8 36.6 6 29 2'' (50 mm) Discharge Flange Dd Dd2 n2 9 7 2 Dd Dd2 n2 483 43.8 2 m 7/8 9UNC m 7/8 9UNC Model HP d d2 C E F G H I FO(C)-66050 50 54 5/6 6 2 FO(C)-66060 60 56 9/6 6 3/4 25 3/6 40 3/8 29 /2 22 /4 Model HP K K2 L M R S V FO(C)-66050 50 FO(C)-66060 60 9 /6 9 /6 3/6 3 /8 4 3/4 33 7/6 7 /6 Model kw d d2 C E F G H I FO(C)-66050 37 396 400 300 FO(C)-66060 45 436 426 640 026 750 565 Model kw K K2 L M R S V FO(C)-66050 37 FO(C)-66060 45 500 500 20 790 060 850 450 Notes: *FO = Semi-open impeller model; FC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 59 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 400 300DSCA4/DSCA4C Model Code GO(C)* Drypit Application Weights Unit: lbs. Model HP W W2 W3 W4 GO(C)-66075 75 39 508 796 685 Unit: kg Model kw W W2 W3 W4 GO(C)-66075 55 45 230 360 30 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight Suction Flange Ds Ds2 T n h 23 /2 2 /4 7/6 6 Ds Ds2 T n h 596.9 539.8 36.6 6 29 2'' (50 mm) Discharge Flange Dd Dd2 n2 9 7 2 Dd Dd2 n2 483 43.8 2 m 7/8 9UNC m 7/8 9UNC Model HP d d2 C E F G H I GO(C)-66075 75 6 2 6 7/8 6 3/4 25 3/6 40 3/8 29 /2 22 3/6 Model HP K K2 L M R S V GO(C)-66075 75 9 /6 9 /6 /4 3 /8 4 3/4 33 7/6 7 /6 Model kw d d2 C E F G H I GO(C)-66075 55 400 300 572 426 640 026 750 580 Model kw K K2 L M R S V GO(C)-66075 55 500 500 30 790 060 850 450 Notes: *GO = Semi-open impeller model; GC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 60 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Dimensions Model 400 300DSCA4 Model Code EEC Drypit Application Weights Unit: lbs. Unit: kg 2'' (50 mm) Suction Flange Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 6 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 500 400DSCA4 Model Code DC Drypit Application Weights Unit: lbs. Unit: kg 2'' (50 mm) Suction Flange Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 62 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 600 500DSCA4 Model Code D2C Drypit Application Weights Unit: lbs. Unit: kg Suction Flange 2'' (50 mm) Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 63 (803) 327-5005 (p) (803) 327-5097 (f) rev. 09/5

Dimensions Model 600 500DSCA4 Model Code GC Drypit Application Weights Unit: lbs. Unit: kg Suction Flange 2'' (50 mm) Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 64 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 600 500DSCA4 Model Code G2C Drypit Application Weights Unit: lbs. Unit: kg 2'' (50 mm) Suction Flange Discharge Flange Notes: The weight of pump includes the weight of 50 ft. (5.25 m) of cables. www.pumpsebara.com 65 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Dimensions Model 200 50DSCA4/DSCA4C Model Code HO(C)* Drypit Application Weights Unit: lbs. Model HP W W2 W3 W4 HO(C)-46050 50 269 309 HO(C)-46060 60 2235 22 464 265 HO(C)-46075 75 2345 265 Unit: kg Model kw W W2 W3 W4 HO(C)-46050 37 984 40 HO(C)-46060 45 04 00 20 20 HO(C)-46075 55 064 20 W: Pump weight W3: Base weight W2: Suction elbow weight W4: Water in pump weight 2'' (50 mm) Suction Flange Ds Ds2 T n h 3 /2 3/4 8 7/8 Ds Ds2 T n h 342.9 298.4 28.5 8 23 Model HP d d2 C E F G H I HO(C)-46050 50 52 3/6 HO(C)-46060 60 8 6 54 9/6 2 7/6 2 /4 24 7/6 7 /6 7 /6 HO(C)-46075 75 56 /8 Model HP K K2 L M R S V HO(C)-46050 50 HO(C)-46060 60 3 3/4 3 3/4 3/6 25 3/6 29 5/6 27 9/6 7 /6 HO(C)-46075 75 Model kw d d2 C E F G H I HO(C)-46050 37 326 HO(C)-46060 45 200 50 386 36 540 62 450 450 HO(C)-46075 55 426 Model kw K K2 L M R S V HO(C)-46050 37 HO(C)-46060 45 350 350 20 640 760 700 450 HO(C)-46075 55 Notes: *HO = Open impeller model; HC = Enclosed impeller model The weight of pump includes the weight of 50 ft. (5.25 m) of cables. Discharge Flange Dd Dd2 n2 9 /2 8 Dd Dd2 n2 280 24.3 8 m 3/4 0UNC m 3/4 0UNC www.pumpsebara.com 66 (803) 327-5005 (p) (803) 327-5097 (f) rev. /6

Sectional View QDC (Quick Discharge Connector) for Model DSC4 5 4 3 2 www.pumpsebara.com 67 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Sectional View Model DSC4 with Quick Discharge Connector Semi-Open Impeller For reference only; consult spare parts pricing for available spare parts Part No. 800 749 748 747 746 745 74 729-02 729-0 53 280 274 99 93-04 93-03 93-02 93-0 84 35-0 32 2-02 2-0 20-0 20-09 20-08 20-07 20-06 20-05 20-04 20-03 20-02 20-0 7-03 7-02 7-0 5-03 5-02 5-0 07 02 07 02 005 00 Part Name Motor Guide Pipe Bush Floor Plate Guide Pipe Holder Guide Pipe Floor Frame Sliding Guide Spring Washer Spring Washer Quick Discarge Connector Pipe Clamp Snap Ring Impeller Bolt Cap Plug (Air Vent) Plug (Leak Check) Plug (Oil Drain) Plug (Oil Port) Cooling Water Pipe Seal Washer Parallel Pin Hole-in Anchor Anchor Bolt Holder Bolt Hex. Head Bolt Hex. Head Bolt Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Hex. Socket Cap Screw Impeller Bolt Sheet Gasket Sheet Gasket Sheet Gasket O-Ring O-Ring O-Ring Mechanical Seal Side Plate Impeller Cooling Jacket Suction Cover Intermediate Casing Pump Casing Material ASTM A283 ASTM A283 ASTM A283 ASTM 536 ASTM A48 CL35 ASTM A48 CL30 SGP AISI304/NBR AISI 403 NBR Non-Asbestos NBR NBR NBR ASTM A48 CL35 ASTM A48 CL35 ASTM A283 Gr. D ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35 No. for Unit Set 2 2 4 6 2 2 2 2 2 4 2 2 4 4 8 2 2 6 6 4 Set Set www.pumpsebara.com 68 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Sectional View Model DSC4 with Quick Discharge Connector Enclosed Impeller Part No. Part Name Material No. for Unit 99* Impeller Bolt Cap ASTM A48 CL30 (4P/6P 50-45HP) 304 SS (4P/6P/8P 75-245HP, 0P 50-45HP) For reference only; consult spare parts pricing for available spare parts Part No. 800 749 748 747 746 745 74 729-02 729-0 53 280 274 99* 93-04 93-03 93-02 93-0 84 39 35-0 32 2-02 2-0 20-0 20-09 20-08 20-07 20-06 20-05 20-04 20-03 20-02 20-0 7-03 7-02 7-0 5-03 5-02 5-0 07 07 02 07 02 005 00 Part Name Motor Guide Pipe Bush Floor Plate Guide Pipe Holder Guide Pipe Floor Frame Sliding Guide Spring Washer Spring Washer Quick Discarge Connector Pipe Clamp Snap Ring Impeller Bolt Cap Plug (Air Vent) Plug (Leak Check) Plug (Oil Drain) Plug (Oil Port) Cooling Water Pipe Spring Pin Seal Washer Parallel Pin Hole-in Anchor Anchor Bolt Holder Bolt Hex. Head Bolt Hex. Head Bolt Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Hex. Socket Cap Screw Impeller Bolt Sheet Gasket Sheet Gasket Sheet Gasket O-Ring O-Ring O-Ring Mechanical Seal Casing Ring Side Plate Impeller Cooling Jacket Suction Cover Intermediate Casing Pump Casing Material AISI 420 ASTM A283 ASTM A283 ASTM A283 ASTM 536 ASTM A48 CL35 See below* SGP AISI304/NBR AISI 420 AISI 403 NBR Non-Asbestos NBR NBR NBR SUS420 ASTM A48 CL35 ASTM A48 CL35 ASTM A283 Gr. D ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35 No. for Unit Set 2 2 4 6 2 2 2 2 2 2 4 2 2 4 4 8 2 2 6 6 4 Set www.pumpsebara.com 69 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5

Sectional View Model DSCA4 Drypit Application Semi-Open Impeller For reference only; consult spare parts pricing for available spare parts www.pumpsebara.com 70 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5 Part No. 800 729-02 729-0 607 280 274 99 93-06 93-05 93-04 93-03 93-02 93-0 84-02 84-0 76 60 35 32 2 20-2 20-20-0 20-09 20-08 20-07 20-06 20-05 20-04 20-03 20-02 20-0 7-05 7-04 7-03 7-02 7-0 5-05 5-04 5-03 5-02 5-0 07 02 07 04 02 005 00 Part Name Motor Spring Washer Spring Washer Suction Elbow Pipe Clamp Snap Ring Impeller Bolt Cap Plug (Gauge Connection) Plug (Gauge Connection) Plug (Air Vent) Plug (Leak Check) Plug (Oil Drain) Plug (Oil Port) Return Pipe Cooling Water Pipe Suction Stand Base Seal Washer Parallel Pin Anchor Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Stud Bolt/Nut Hex. Socket Cap Screw Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Stud Bolt/Nut Hex. Socket Cap Screw Impeller Bolt Sheet Gasket Sheet Gasket Sheet Gasket Sheet Gasket Sheet Gasket O-Ring O-Ring O-Ring O-Ring O-Ring Mechanical Seal Side Plate Impeller Cooling Jacket Handhole Cover Suction Cover Intermediate Casing Pump Casing Material ASTM A48 CL35 ASTM A48 CL30 SGP/FCMB SGP ASTM A48 CL35 ASTM A283 AISI304/NBR SUS420 SD295A ASTM A283 ASTM A283 ASTM A283 ASTM A283 ASTM A283 AISI 403 Non-Asbestos Non-Asbestos NBR Non-Asbestos NBR NBR NBR NBR NBR ASTM A48 CL35 ASTM A48 CL35 ASTM A283 Gr. D ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35 No. for Unit Set 4 6 2 Set 2 8 2 4 8 8 8 2 4 4 8 8 2 2 6 6 Set Set

Sectional View Model DSCA4 Drypit Application Enclosed Impeller Part No. Part Name Material No. for Unit 99* Impeller Bolt Cap ASTM A48 CL30 (4P/6P 50-45HP) 304 SS (4P/6P/8P 75-245HP, 0P 50-45HP) For reference only; consult spare parts pricing for available spare parts No. for Unit Set 4 6 2 Set 2 2 8 2 4 8 8 8 2 4 4 8 2 2 6 6 6 Set Set www.pumpsebara.com 7 (803) 327-5005 (p) (803) 327-5097 (f) rev. 03/5 Part No. 800 729-02 729-0 607 280 274 99* 93-06 93-05 93-04 93-03 93-02 93-0 84-02 84-0 76 60 39 35 32 2 20-2 20-20-0 20-09 20-08 20-07 20-06 20-05 20-04 20-03 20-02 20-0 7-05 7-04 7-03 7-02 7-0 5-05 5-04 5-03 5-02 5-0 07 07 02 07 04 02 005 00 Part Name Motor Spring Washer Spring Washer Suction Elbow Pipe Clamp Snap Ring Impeller Bolt Cap* Plug (Gauge Connection) Plug (Gauge Connection) Plug (Air Vent) Plug (Leak Check) Plug (Oil Drain) Plug (Oil Port) Return Pipe Cooling Water Pipe Suction Stand Base Spring Pin Seal Washer Parallel Pin Anchor Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Stud Bolt/Nut Hex. Socket Cap Screw Hex. Head Bolt Stud Bolt/Nut Hex. Head Bolt Stud Bolt/Nut Stud Bolt/Nut Hex. Socket Cap Screw Impeller Bolt Sheet Gasket Sheet Gasket Sheet Gasket Sheet Gasket Sheet Gasket O-Ring O-Ring O-Ring O-Ring O-Ring Mechanical Seal Casing Ring Side Plate Impeller Cooling Jacket Handhole Cover Suction Cover Intermediate Casing Pump Casing Material ASTM A48 CL35 See below SGP/FCMB SGP ASTM A48 CL35 ASTM A283 AISI304/NBR SUS420 SD295A ASTM A283 ASTM A283 ASTM A283 ASTM A283 ASTM A283 AISI 403 Non-Asbestos Non-Asbestos NBR Non-Asbestos NBR NBR NBR NBR NBR SUS420 ASTM A48 CL35 ASTM A48 CL35 ASTM A283 Gr. D ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35 ASTM A48 CL35