HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Partly threaded, galvanized or yellow chromatized dk k L d m Head Ø dk Head height k Cross recess size m Drive 3.0 6.0 1.8 3.0 PZ1 4.0 8.0 2.4 4.2 PZ2 4.5 9.0 2.7 4.4 PZ2 5.0 10.0 2.9 5.0 PZ2 6.0 12.0 3.4 6.3 PZ3 Galvanized Yellow chromatized 3.0 30 1,000 015.41.582 015.43.586 4.0 35 500 015.41.877 015.43.871 40 500 015.41.886 015.43.880 50 500 015.41.902 015.43.906 60 200 015.41.920 015.43.924 70 200 015.41.939 015.43.933 4.5 40 500 015.41.966 015.43.960 50 200 015.41.984 015.43.988 60 200 015.42.007 015.44.001 70 200 015.42.034 015.44.038 80 200 015.42.043 015.44.047 5.0 50 200 015.42.132 015.44.136 60 200 015.42.141 015.44.145 70 200 015.42.169 015.44.163 80 100 015.42.178 015.44.172 90 100 015.42.187 015.44.181 100 100 015.42.196 015.44.190 110 100 015.42.197 015.44.197 120 100 015.42.198 015.44.198 6.0 50 200 015.42.347 015.44.341 60 200 015.42.356 015.44.350 70 100 015.42.365 015.44.369 80 100 015.42.374 015.44.378 90 100 015.42.383 015.44.387 100 100 015.42.392 015.44.396 120 100 015.42.418 015.44.412 140 100 015.42.436 015.44.430 160 100 015.42.454 015.44.458 180 100 015.42.472 015.44.476 Partly threaded, Zinc plated Zinc Plated 4.0 30 1,000 015.41.865 0.2
HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Fully threaded, galvanized or yellow chromatized dk k L d m Galvanized Yellow chromatized 2.5 16 1,000 015.31.255 015.33.259 3.0 13 1,000 015.31.326 015.33.320 (Head Ø 5.0) 15 1,000 015.31.335 015.33.339 17 1,000 015.31.344 015.33.348 3.0 (Head Ø 6.0) 13 1,000 015.31.522 015.33.526 15 1,000 015.31.531 015.33.535 17 1,000 015.31.540 015.33.544 20 1,000 015.31.559 015.33.553 25 1,000 015.31.577 015.33.571 30 1,000 015.31.586 015.33.580 35 1,000 015.31.595 015.33.599 40 500 015.31.602 015.33.606 3.5 13 1,000 015.31.620 015.33.624 15 1,000 015.31.639 015.33.633 17 1,000 015.31.648 015.33.642 20 1,000 015.31.657 015.33.651 25 1,000 015.31.675 015.33.679 30 1,000 015.31.684 015.33.688 35 1,000 015.31.693 015.33.697 40 500 015.31.700 015.33.704 45 500 015.31.719 015.33.713 50 500 015.31.728 015.33.722 4.0 15 1,000 015.31.826 015.33.820 17 1,000 015.31.835 015.33.839 20 1,000 015.31.844 015.33.848 25 1,000 015.31.853 015.33.857 30 1,000 015.31.862 015.33.866 35 500 015.31.871 015.33.875 40 500 015.31.880 015.33.884 45 500 015.31.899 015.33.893 50 500 015.31.906 015.33.900 55 200 015.31.808 015.33.802 Head Ø dk Head height k Cross recess size m Drive 2.5 5.0 1.6 2.8 PZ1 3.0 5.0 / 6.0 1.8 3.0 PZ1 3.5 7.0 2.1 4.0 PZ2 4.0 8.0 2.4 4.2 PZ2 4.5 9.0 2.7 4.4 PZ2 5.0 10.0 2.9 5.0 PZ2 Galvanized Yellow chromatized 4.5 17 1,000 015.31.915 015.33.919 20 1,000 015.31.924 015.33.928 25 1,000 015.31.933 015.33.937 30 1,000 015.31.942 015.33.946 35 500 015.31.951 015.33.955 40 500 015.31.960 015.33.964 45 500 015.31.979 015.33.973 50 200 015.31.988 015.33.982 55 200 015.32.010 015.34.014 5.0 20 1,000 015.32.074 015.34.078 25 1,000 015.32.083 015.34.087 30 500 015.32.092 015.34.096 35 500 015.32.109 015.34.103 40 500 015.32.118 015.34.112 45 200 015.32.127 015.34.121 50 200 015.31.997 015.33.991 55 200 015.32.136 015.34.130 0.3
HOSPA Chipboard screws with raised head Material: Thread: Fully threaded galvanized nickel plated burnished With cross recess, galvanized, nickel plated or burnished dk f Thread Ø k L d Galvanized m Nickel plated Burnished 3.0 13 1,000 015.51.524 15 1,000 015.55.531 17 1,000 015.51.542 015.55.540 20 1,000 015.55.559 25 1,000 015.55.577 30 1,000 015.55.586 3.5 15 1,000 015.51.631 015.55.639 015.59.637 17 1,000 015.51.640 015.55.648 015.59.646 20 1,000 015.51.659 015.55.657 015.59.655 25 1,000 015.51.677 015.55.675 015.59.673 30 1,000 015.51.686 015.55.684 015.59.682 35 1,000 015.51.695 015.55.693 4.0 17 1,000 015.51.837 20 1,000 015.51.846 015.55.844 25 1,000 015.51.855 015.55.853 30 1,000 015.51.864 015.55.862 35 500 015.51.873 015.55.871 015.59.879 40 500 015.51.882 015.55.880 015.59.888 Head Ø dk Head size k Head size f Cross recess size m Drive 3.0 6.0 1.8 0.7 3.0 PZ1 3.5 7.0 2.1 1.0 4.0 PZ2 4.0 8.0 2.4 1.0 4.2 PZ2 Big pack Thread Ø Galvanized Nickel plated Burnished 3.0 13 10,000 017.51.524 15 10,000 017.55.531 17 10,000 017.51.542 017.55.540 20 10,000 017.55.559 25 10,000 017.55.577 30 10,000 017.55.586 3.5 15 10,000 017.51.631 017.55.639 017.59.637 17 10,000 017.51.640 017.55.648 017.59.646 20 10,000 017.51.659 017.55.657 017.59.655 25 10,000 017.51.677 017.55.675 017.59.673 30 8,000 017.51.686 017.55.684 017.59.682 35 8,000 017.51.695 017.55.693 4.0 17 8,000 017.51.837 20 8,000 017.51.846 017.55.844 25 5,000 017.51.855 017.55.853 30 5,000 017.51.864 017.55.862 35 4,000 017.51.873 017.55.871 017.59.879 40 4,000 017.51.882 017.55.880 017.59.888 PRD(Package Regular Delivery) System 0.4
HOSPA Pan head chipboard screws Material: Thread: Fully threaded galvanized With cross recess, galvanized dk d k L m Head Ø dk Head height k Cross recess size m Drive 3.0 6.0 2.4 3.0 PZ1 3.5 7.0 2.5 4.0 PZ2 4.0 8.0 2.9 4.2 PZ2 4.5 9.0 3.2 4.4 PZ2 5.0 10.0 3.5 5.0 PZ2 3.0 13 1,000 015.71.526 15 1,000 015.71.535 17 1,000 015.71.544 20 1,000 015.71.553 25 1,000 015.71.571 3.5 13 1,000 015.71.624 15 1,000 015.71.633 17 1,000 015.71.642 20 1,000 015.71.651 25 1,000 015.71.679 30 1,000 015.71.688 35 1,000 015.71.697 4.0 13 1,000 015.71.811 15 1,000 015.71.820 17 1,000 015.71.839 20 1,000 015.71.848 25 1,000 015.71.857 30 1,000 015.71.866 35 500 015.71.875 40 500 015.71.884 4.5 13 1,000 015.71.900 15 1,000 015.71.919 17 1,000 015.71.991 20 1,000 015.71.928 25 1,000 015.71.937 30 500 015.71.946 35 500 015.71.955 5.0 17 1,000 015.72.050 20 1,000 015.72.078 30 500 015.72.096 40 500 015.72.112 50 200 015.72.130 Big pack 3.0 13 10,000 017.71.526 15 10,000 017.71.535 17 9,000 017.71.544 20 8,000 017.71.553 25 8,000 017.71.571 3.5 13 10,000 017.71.624 15 10,000 017.71.633 17 8,000 017.71.642 20 8,000 017.71.651 25 8,000 017.71.679 30 7,000 017.71.688 35 5,000 017.71.697 4.0 13 8,000 017.71.811 15 8,000 017.71.820 17 8,000 017.71.839 20 8,000 017.71.848 25 5,000 017.71.857 30 5,000 017.71.866 35 3,000 017.71.875 40 3,000 017.71.884 4.5 13 5,000 017.71.900 15 5,000 017.71.919 17 5,000 017.71.991 20 5,000 017.71.928 25 5,000 017.71.937 30 3,000 017.71.946 35 3,000 017.71.955 5.0 17 5,000 017.72.050 20 5,000 017.72.078 30 3,000 017.72.096 40 2,000 017.72.112 50 2,000 017.72.130 0.5
HOSPA Rear panel screws Material: Finish: Type of head: Drive: Thread: Galvanized Flat head Cross recess PZ Fully threaded galvanized 30 dk k L d m Head Ø dk Head height k Cross recess size m Drive 3.0 7.8 1.5 3.8 PZ1 3.5 8.5 1.8 3.8 PZ2 4.0 9.5 1.9 4.3 PZ2 3.0 20 1,000 016.10.555 25 1,000 016.10.573 30 1,000 016.10.582 3.5 25 1,000 016.10.671 30 1,000 016.10.680 35 1,000 016.10.699 4.0 20 1,000 016.10.840 25 1,000 016.10.859 30 1,000 016.10.868 35 500 016.10.877 40 500 016.10.886 Big pack 3.0 20 5,000 016.20.555 25 5,000 016.20.573 30 5,000 016.20.582 3.5 25 5,000 016.20.671 30 5,000 016.20.680 35 5,000 016.20.699 4.0 20 5,000 016.20.840 25 5,000 016.20.859 30 5,000 016.20.868 35 5,000 016.20.877 40 5,000 016.20.886 cover caps Area of application: For chipboard screws with countersunk head Note Specified RAL colours are not binding and merely for your guidance white, RAL 9010 light grey, RAL 7035 black, RAL 9005 fawn coloured, RAL 8007 sepia brown, RAL 8014 pine coloured, ~RAL 1034 dark grey, RAL 7037 beige, RAL 1015 For chipboard screws with cross recess Ø12 Ø13 For cross recess Colour PZ2 White, RAL 9010 045.03.726 Pine coloured 045.03.020 Fawn coloured, RAL 8007 045.03.128 PZ3 White, RAL 9010 045.03.735 Pine coloured 045.03.039 Fawn coloured, RAL 8007 045.03.137 : 1,000 pcs. For cross recess PZ2 For cross recess PZ3 0.6
Threaded screws with flat head Area of application: Material: Drive: Fixing furniture handles and knobs etc. Combi cross/slot recess galvanized nickel plated M4 Thread, galvanized M4 l fl 10, pieces 8 100 or 1,000 022.35.081 9 100 or 1,000 022.35.090 10 100 or 1,000 022.35.109 12 100 or 1,000 022.35.127 15 100 or 1,000 022.35.154 18 100 or 1,000 022.35.181 20 100 or 1,000 022.35.207 22 100 or 1,000 022.35.225 23 100 or 1,000 022.35.234 24 100 or 1,000 022.35.243 25 100 or 1,000 022.35.252 26 100 or 500 022.35.261 27 100 or 500 022.35.270 28 100 or 500 022.35.289 30 100 or 500 022.35.305 32 100 or 500 022.35.323 35 100 or 500 022.35.350 38 100 or 500 022.35.387 40 100 or 500 022.35.403 42 100 or 500 022.35.420 45 100 or 500 022.35.458 50 100 or 500 022.35.501 52 100 or 500 022.35.520 55 100 or 300 022.35.550 60 100 or 300 022.35.609 Big pack Length L, pieces 8Optimal access to the screws. 5,000 022.45.081 9Box can be reclosed at any time. 5,000 022.45.090 10 5,000 022.45.109 12 5,000 022.45.127 15 5,000 022.45.154 18 5,000 022.45.181 20 5,000 022.45.207 22 5,000 022.45.225 23 5,000 022.45.234 24 5,000 022.45.243 25 5,000 022.45.252 26 5,000 022.45.261 27 5,000 022.45.270 28 5,000 022.45.289 30 3,000 022.45.305 32 3,000 022.45.323 The right screws at a glance. 35 3,000 022.45.350 Now also with the EAN code for fast reordering. 38 3,000 022.45.387 40 3,000 022.45.403 42 3,000 022.45.420 45 3,000 022.45.458 50 3,000 022.45.501 52 3,000 022.45.520 55 3,000 022.45.550 60 3,000 022.45.609 Fischer GK plasterboard plugs 0.7
Fischer GK plasterboard plugs t l Suitable for Single and double plasterboard, rear-insulated plasterboard. Distance to solid Wall plug For screw sizes material t length l Instructions Insert bit is supplied (use a bit holder!). Fitted with a battery/electric drill/driver without pre-drilling (plasterboards thicker than 15 should be pre-drilled). Insert bit can also be used to drive the screws. minimum 25 22 Ø 4.0 5.0 Type GK 100 051.63.000 Description Wall plug screws firmly into plasterboard with the supplied insert bit. Low space requirement behind plasterboard. Designed for wood screws, sheet-metal screws and chipboard screws with 4.0 to 5.0 diameter. Not suitable for tiled plasterboard or fibre-plasterboard. : 100PCS Varianta Special screws For screwing into wood For Ø 3 drill holes For screwing into wood For Ø 5 drill holes Finish/colour: Drive: Thread: Nickel plated PZ2 cross slot Pitch 2.0, thread Ø 4.2, body Ø 2.8 Finish/colour: Drive: Thread: Galvanized, nickel plated or black PZ2 cross slot or TS20 T-star drive Pitch 2.2, thread Ø 6.2, body Ø 4.6 pieces Orga-Box 10.5 100 or 1000 013.15.617 13.5 100 or 1000 013.15.626 16 100 or 1000 013.15.635 Finish pieces PZ2 cross slot drive, Orga-Box 10.5 Nickel plated 100 or 1000 013.15.715 Black 100 or 1000 013.15.317 13.5 Nickel plated 100 or 1000 013.15.724 Black 100 or 1000 012.15.324 16 Nickel plated 100 or 1000 013.15.733 Black 100 or 1000 013.15.330 0.8
Fixing Anchor Bolt The dowel s inner side construction generates an optimal radial fixing in the direction of the anchor rod. The anchor rod s specific geometry ensures an optimal expansion in all directions within the drill hole. 0.9
Fixing Anchor Bolt Drill hole Ø Dowel size Min drill depth Length of dowel - Fixing bolt Ø Fixing rod length Thread Cat No. Packaging min depth of anchorage qty(set) 12 12 x 50 60 50 8 65 M8 051.99.000 50 80 051.99.001 100 051.99.002 110 051.99.003 120 051.99.004 150 051.99.005 180 051.99.006 200 051.99.007 250 051.99.008 300 051.99.009 14 14 x 75 85 75 10 100 M10 051.99.010 25 120 051.99.011 150 051.99.012 160 051.99.013 180 051.99.014 200 051.99.015 250 051.99.016 300 051.99.017 Drill hole Ø Dowel size Min drill depth Length of dowel - Fixing bolt Ø Fixing rod length Thread Cat No. Packaging min depth of anchorage qty(set) 12 12 x 100 110 100 8 120 M8 051.99.020 50 150 051.99.021 180 051.99.022 200 051.99.023 250 051.99.024 300 051.99.025 14 14 x 140 150 140 10 150 M10 051.99.026 25 180 051.99.027 200 051.99.028 250 051.99.029 300 051.99.030 0.10
Fixing Anchor Bolt Holding dim Cat No. Packaging qty(set) 11-15 051.99.060 100 15-19 051.99.061 21-23 051.99.062 26-28 051.99.063 32-35 051.99.064 40-43 051.99.065 50 48-51 051.99.066 52-56 051.99.067 57-60 051.99.068 30 62-64 051.99.069 74-80 051.99.070 83-91 051.99.071 25 108-114 051.99.072 10 Item Drill hole Ø Dowel size Min drill depth Length of dowel - Fixing bolt Ø Fixing End cap Cat No. Packaging min depth of anchorage rod length finish qty(set) W1 14 14 x 75 85 75 10 120-051.99.040 2 chrom 051.99.041 white 051.99.042 14 x 140 150 140 10 180-051.99.043 chrom 051.99.044 white 051.99.045 Item Drill hole Ø Dowel size Min drill depth Length of dowel - Fixing bolt Ø Fixing End cap Cat No. Packaging min depth of anchorage rod length finish qty(set) W2 14 14 x 75 85 75 10 120-051.99.046 2 chrom 051.99.047 white 051.99.048 14 x 140 150 140 10 180-051.99.049 chrom 051.99.050 white 051.99.051 0.11
Fixing Anchor Bolt 0.12