High Performance and Heavy Duty Turning Center Combining rigid slant bed construction with advanced technology for superior machining of middle to large sized workpieces. 2 DOOSAN Infracore Products

PUMA 280 Series 3

MAIN SPINDLE HEAD HEADSTOCK AND SPINDLE Main Spindle 18.5 / 22 kw 3,500 rpm 63.8 kgf.m PUMA 280 / 280L / 280M / 280LM : 3,500 rpm : 18.5 / 22 kw PUMA 280/280L PUMA 280M/280LM 4 DOOSAN Infracore Products

0.15 10 (PUMA 280 / 280L) BMT (BMT 55P) 0.15 12 (PUMA 280M / 280LM) 12Station,. (BMT 55P) Key. BMT-P TURRET PUMA 280M / LM : 3,500 rpm : 18.5 / 22 kw 1.84 Preci-flex adapter application Collet application End mill 16 (HSS) 2 V : 50 m/min S : 1000 rpm F : 0.2 /rev : SM45C 6 19.2 cm 3 /min 11 35.2 cm 3 /min PUMA 280 Series 5

CE PUMA280 / 280L 242 (32+210) PUMA280M / 280LM 242 (37+205) PUMA280L/280LM PUMA280/280M 680/1,100 A B PUMA280 / 280L PUMA280M / 280LM 420 /410 PUMA280 PUMA280L PUMA280M PUMA280LM 658 /1,078 /610 /1,030 6 DOOSAN Infracore Products

DRILLING Rotary tool spindle speed (rpm) Feedrate (/rev) D22 U-drill Carbon steel SM45C 200 0.45 TAPPING 799 cm 3 / 9 Rotary tool spindle speed (rpm) Feedrate (/min) M202.5 Carbon steel SM45C 400 F1200 (m/min) Spindle speed (/rev) Feedrate (rpm) Carbon steel SM45C 200 785 0.4 X Z 257 360 (FEM:Finite Element Method). Torque Tube Rib45,. PUMA 280 Series 7

: GROOVE SHAFT () Steel (SM45C) D100 x 420 MACHINING OPERATIONS CYCLE TIME 1) O.D Turn 2) W8 Groove 3) M90 Thread V = 260 m/mim F = 0.4 /rev Depth = 5 V = 120 m/mim F = 0.2 /rev Depth = 10 V = 127 m/mim F = 4.233 /rev 2 35 1 29 24 4 2 8 0.75 0.15Ra 8 DOOSAN Infracore Products

(m/min) Feedrate (/rev) () (nose R 0.8) AL2024 300 0.05 0.2 AC. Backlash. X, P4 Angular contact thrust.. (MT#5). (Quill) Foot, (Body)(Jog) MPG. M. 680(1,100) 100 MT5 Live center 100 ( ) : PUMA 280L PUMA 280 Series 9

90 8.4LCD 90. 45. Collet chuck Part catcher Automatic Tool Pre-setter Patrol lamp Oil skier Chip conveyor Chuck air blow Work measurement Part conveyor 10 DOOSAN Infracore Products

: PUMA 280 Series 11

Tooling system : 12 DOOSAN Infracore Products

Tool interference diagram : : PUMA 280 Series 13

PUMA 280 PUMA 280L PUMA 280M rpm kgf. m ASA/ deg - rpm - kw kw kva kg 658 680 3,390 x 1,670 4,700 420 242 (32 + 210) - 10 50-36.52 1,078 1,100 3,810 x 1,670 5,700 630 500 255 76 20/24 10( 12) 3,500 63.8 A2#8 / 86 25 x 25 0.15 100 MT #5 100 18.5 / 22 3.0 / 4.0 1,735 610 680 3,390 x 1,670 4,900 PUMA 280LM 410 1,030 242 (37 + 205) 1,100 360(0.001) 12 40 5,000 37.91 3,810 x 1,670 5,900 3Chuck 1 Set 1 Set Soft Jaw 4 Set Unit 1 Set 1 Set Splash Guard 1 Set Tool Holder 1 Set 1 Set 1 Set Transformer Bar Puller Dual Chuck Pressure Bar Feeder Doosan Tool Monitoring System Tool Pre-setter Auto-Door Linear Scale Prograable Tailstock 14 DOOSAN Infracore Products

VISION 380i STM (/) :0.001 :0.001deg X/ /(X,Z/U,W) :ISO/EIA (G01) (G02/G03) 2~4 Work (G50) Work Work (G54~G59) Work Local S-:S5/S4 digit T- M- Offset Offset R Dwell Dwell Rapid Override Feed Override MDI/CRT Program Display Compact Flash Memory Card /Timer RS232C Lable Skip Control In/Out Single Block Optional Block Skip Dry Run Machine Lock Lock Override Cancel Background Editing Cycle Stop Graphic Cycle Cycle Macro Chamfering and Corner R Thread Cutting Retract Offset Direct Measure Input B MDI Operation Backlash Pitch Overtrouble Check Stroke Ckeck Check(/) Servo On On/Off CRT Off Interrupt 2 2 T2/T2 99 100% (10%) 200% (10%) 10.4Color TFT 1,200m FANUC Control axis ( ) Least input increment () Feedrate override ( ) Dwell () Reference position return () Manual handle feed rate ( ) Rapid traverse override ( ) Feedrate per minute () Feedrate per revolution ( ) Spindle orientation ( ) Sub spindle orientation ( ) Cs control (Cs ) Spindle serial output 3nd (3 ) Multi-spindle control ( ) Constantant surface speed control ( ) Spindle synchronization control ( ) Control axis expansion ( ) Simultaneously control axis expansion (Total) ( ) Cylindrical interpolation () 3nd and 4th reference point return (3,4 ) Increment system 1/10 ( 1/10) Polar coordinate interpolation () Program restart ( ) Stored stroke check1 ( 1) Stored stroke 2 and 3 ( 2/3) Tool number coand () Tool nose radius compensation ( ) Number of tool offsets ( ) Tool geometry / wear offset (/) Tool life management ( ) Tool path graphic display ( ) Auto tool offset ( ) Direct input of tool offset value measured B ( B) Doosan Infracore Tool monitoring system ( ) Absolute / Incremental prograing (/) Multi repetitive canned cycle ( ) Simple canned cycle ( ) Decimal point input ( ) Inch / metric conversion (/ ) Circular interpolation () Sub program call ( ) Thread cutting cycle retract ( ) Work coordinate system selection ( ) Maximum coand dimension ( ) M-function (M ) Custom macro B ( B) Variable lead thread cutting ( ) Rigid tapping ( ) Continuous thread cutting ( ) Drilling canned cycle (G80 series) ( ) Direct drawing dimension prograing () Three G code system (selectable) (G) Multi repetitive cycle 2 ( 2) Prograable data input ( ) Doosan easy operating system Input code () I/O in0terface (I/O ) Part program storage length ( ) No. of Registered programs ( ) Search function () MDI/DISPLAY unit () Background editing () Help function (Help ) Running time / parts number display (/ ) Load meter display ( ) Self diagnostic function ( ) Expanded part program editing ( ) Optional block skip ( ) Additional block skip ( ) Reader puncher control 1 (I/O ) External message ( ) Multi language display ( ) Ethernet function 0.001 / 0.0001 0-200% (10% unit) G04 G27, G28, G30 X1, X10, X100 F0/ 50 / 100% G98 G99 G96, G97 Max. 4axes 0.0001 / 0.00001 G12.1, G13.1 Overtravel control digit G40~G42 Geometry & wear data G70~G76 G90, G92, G94 G20 / G21 G02, G03 Nested holds G52~G59 99999.999/(9999.9999 inch) M3 digit G10 ISO, EIA RS-232C Sequence NO. / Program NO. / Address Alarm & Operation display Auto running time & Parts No. display Spindle & Servo load display Copy, Move, Change of NC program Total 9(Only NC function) Embedded ethernet function F-OiT X,Z - - -.T4-64 Opt. Opt. 4 640m 200EA 8.4 color LCD - : Standard OPT : Option PUMA 280 Series 15

0707ILK http:// mt.doosaninfracore.co.kr