BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124)
COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. (The column of KMB-U7, KMB-U6 is hardened and ground.),. The bed is composed of one piece construction with double box for lubricating oil and coolant. The hardened and ground slide ways of the bed provide high stability to the saddle.. The saddle has a rigid box-type construction to cope with loads during heavyduty cutting. It is supported by the wide slide ways of the bed to assure stable movement. B-plastic. B-PLASTIC (Anti-friction material) ensures the smooth movement of the axis. 2 FEED MECHANISM An AC servo motor is adopted for infinitely variable feed movement. Feed change by dial on a panel makes easier operation and appropriate choice of feed speed. BALL SCREW High precision ball screws having double pre-loaded nut on each axis ensures smooth movement, accuracy and rigidity. AUTOMATIC LUBRICATOR AC SERVO MOTOR The slideway and ballscrew of all axis are properly lubricated with automatic lubricator.
HEAD The universal bi-rotary head consisting of upper head and lower head can be turned to any desired angle. Therefore vertical, horizontal and combined angle milling is available. M.P.G Handle (Optional) M.P.G Handle. Electronic handwheel enables operator to access to the work piece for easier operation.. Universal bi-rotary head is fitted with hydraulic tool clamping. When a tool change is required, push button switch is used for a light tool, meanwhile pedal switch is used for a heavy tool. This saves the operator considerable time when a tool change is required. 12~18 3.,. 12~18 spindle speeds can be selected with three levers on the headstock. Electromagnetic brake fitted on the spindle. 3
BED TYPE UNIVERSAL MILLING MACHINE KMB- U3/U5 MANUAL POINT - U3/U5 ONE AXIS CNC CONTROL(HEIDENHAIN TNC 124) TABLE SIZE TRAVEL (X-Axis) (Y-Axis) (Z-Axis) 1700 470 2000 530 1200 1400 600 550 650 4
MACHINE SPECIFICATION DESCRIPTION UNIT KMB-U3 KMB-U5 POINT-U3 POINT-U5 Table size (length width) 1700 470 2000 530 T-slots (number width) Distance between T-slots No. 5 20 80 Max. permissible load Kg 1500 2000 Longitudinal travel 1200 1400 Cross travel 600 Height from table to vertical spindle nose 40~590 40~690 Height from table to horizontal spindle center 50~600 50~700 Longitudinal & Cross feedrate Vertical feedrate No. of feeds Longitudinal & Cross rapid feedrate Vertical rapid feedrate Taper No. of spindle speeds /min /min No. /min /min No. 2000 1000 5000 2500 NT50 12 Speed rpm 50Hz 40~1720 60Hz 40~1620 Distance from column to vertical spindle center Distance from column to horizontal spindle nose Spindle drive motor Feed drive motor Coolant pump motor Hydraulic clamping motor 570 580 7.5 4.2 0.1 0.75 Approx. machine net weight kg 6000 7000 Floor space (length width height) 3960 2450 2600 4660 2525 2700 Packing size (length width height) 2580 2330 2850 2680 2430 2950 The contents of the catalogue are subject to change without prior notice. CUTTING DATA TEST PIECE CUTTER USED DESCRIPTION CUTTING CONDITIONS MACHINING ACCURACY Material SM45C Dimensions 600 400 300 Type Face mill Diameter 160 No. of teeth 10 Material P20 MACHINE Spindle speed Cutting speed Cutting depth Feed per tooth Feed Cutting volume Permissible deviation Straightness Surface trueness KMB-U3, U5 POINT-U3, U5 210 r.p.m 105.5 m/min 4, 5 0.12 250 /min 160, 200 /min 300b 500 0.015 0.02 STANDARD ACCESSORIES Tool box Spanner Driver (+, -) Wrench Lamp Anchor bolt Anchor plate Locating bar Pull stud : 3pcs OPTIONAL ACCESSORIES Digital readout Horizontal attachment Automatic cycle 5
BED TYPE UNIVERSAL MILLING MACHINE KMB- U6 M A N U A L P O I N T- U 6 ONE AXIS CNC CONTROL(HEIDENHAIN TNC 124) TABLE SIZE TRAVEL (X-Axis) (Y-Axis) (Z-Axis) 2200 550 1600 710 700 6
MACHINE SPECIFICATION DESCRIPTION UNIT KMB-U6 POINT-U6 Table size (length width) 2200 550 T-slots (number width) No. 5 20 Distance between T-slots 80 Max. permissible load Kg 3000 Longitudinal travel 1600 Cross travel Height from table to vertical spindle nose 710 50~750 Height from table to horizontal spindle center 60~760 Longitudinal & Cross feedrate /min 2000 Vertical feedrate No. of feeds Longitudinal & Cross rapid feedrate /min No. /min 1000 5000 Vertical rapid feedrate /min 2500 Taper NT50 No. of spindle speeds Speed Distance from column to horizontal spindle center No. rpm 12 40~1600(50/60Hz) 650 Distance from column to horizontal spindle nose 660 Spindle drive motor 11 Feed drive motor 4.2 Coolant pump motor 0.1 Hydraulic clamping motor 0.75 Approx. machine net weight kg 8000 Floor space (length width height) 4760 2720 3050 Packing size (length width height) 2890 2610 3060 The contents of the catalogue are subject to change without prior notice. CUTTING DATA TEST PIECE CUTTER USED DESCRIPTION CUTTING CONDITIONS MACHINING ACCURACY Material SM45C Dimensions 600 400 300 Type Face mill Diameter 160 No. of teeth 10 Material P20 MACHINE Spindle speed Cutting speed Cutting depth Feed per tooth Feed Cutting volume Permissible deviation Straightness Surface trueness KMB-U6 POINT-U6 220 r.p.m 110.5 m/min 5,6 0.11 250 /min 200, 240 /min 300b 500 0.015 0.02 STANDARD ACCESSORIES Tool box Spanner Driver (+, -) Wrench Lamp Anchor bolt Anchor plate Locating bar Pull stud : 3pcs OPTIONAL ACCESSORIES Digital readout Horizontal attachment Automatic cycle 7
BED TYPE UNIVERSAL MILLING MACHINE KMB- U7 MANUAL POINT - U7 ONE AXIS CNC CONTROL(HEIDENHAIN TNC 124) TABLE SIZE TRAVEL (X-Axis) (Y-Axis) (Z-Axis) 2700 750 2000 1000 800 8 HYDRAULIC CLAMPING SYSTEM Cross and vertical axis is clamped automatically by hydraulic clamping system. TABLE SIZE TRAVEL (X-Axis) (Y-Axis) (Z-Axis) 3300 750 3900 750 2600 3200 1000 800
MACHINE SPECIFICATION DESCRIPTION Table size (length width) T-slots (number width) Distance between T-slots Max. permissible load Longitudinal travel Cross travel Height from table to vertical spindle nose Height from table to horizontal spindle center Longitudinal & Cross feedrate Vertical feedrate No. of feeds Longitudinal & Cross rapid feedrate Vertical rapid feedrate Taper No. of spindle speeds Speed Distance from column to vertical spindle center Distance from column to horizontal spindle nose Spindle drive motor Feed drive motor Coolant pump motor Hydraulic clamping motor Approx. machine net weight Floor space (length width height) Packing size (length width height) The contents of the catalogue are subject to change without prior notice. UNIT No. Kg /min /min No. /min /min No. rpm kg KMB-U7 POINT-U7 2700 750 3300 750 3900 750 5 22 120 4000 2000 2600 3200 1000 50~850 130~930 2000 1000 5000 2500 NT50 18 50Hz 15~1080 60Hz 18~1300 875 955 11 4.2 0.18 1.5 15000 16000 17000 5710 3410 3400 7950 3410 3400 9770 3410 3400 3120 3600 3550 3720 3600 3550 4320 3600 3550 CUTTING DATA TEST PIECE CUTTER USED DESCRIPTION CUTTING CONDITIONS MACHINING ACCURACY Material SM45C Dimensions 600 400 300 Type Face mill Diameter 200 No. of teeth 12 Material P20 MACHINE Spindle speed Cutting speed Cutting depth Feed per tooth Feed Cutting volume Permissible deviation Straightness Surface trueness KMB-U7 POINT-U7 170 r.p.m 107 m/min 5,6 0.15 300 /min 240, 288 /min 300b 500 0.015 0.02 STANDARD ACCESSORIES Tool box Spanner Driver (+, -) Wrench Lamp Anchor bolt Anchor plate Locating bar Pull stud : 3pcs OPTIONAL ACCESSORIES Digital readout Direct horizontal spindle Horizontal attachment Automatic cycle 9
POINT=HEIDENHAIN TNC 124 ONE AXIS CNC CONTROL POINT -U3/U5/U6/U7 10 POINT-Series POINT series KIHEUNG milling machines with HEIDENHAIN TNC124 are fully adequate for a straight cut control for milling, drilling and tapping supported by a floating tap holder and even circular path with circle hole pattern up to 999 holes. Rectangular pocket Program blocks BEGIN PGM 60 MM 1 F 9999 2 Z+20 3 X+20 R0 4 Y+10 R0 5 TOOL CALL 7 Z 6 S 1000 7 M 3 8 CALL LBL 1 9 X+40 R0 10 Y+50 R0 11 CALL LBL 1 12 X+60 R0 13 Y+40 R0 14 CALL LBL 1 15 Z+20 16 M 2 17 LBL 1 18 F 200 19 Z 10 20 IY+20 R0 21 F 9999 22 ñz+2 23 LBL 0 24 END PGM 60 MM
Operating panel Linear scale M.P.G Handle Standard cycles are provided for peck drilling, hole pattern, pocket milling and circular path. Peck drilling cycle Tapping cycle Circle hole pattern Linear hole pattern Circle hole pattern Linear hole pattern 11
OPTIONAL KMB/POINT-U3, U5, U6 HORIZONTAL ATTACHMENT 12 KMB/POINT-U7 DIRECT HORIZONTAL SPINDLE HORIZONTAL ATTACHMENT
MACHINE DIMENSION KMB/POINT-U3, KMB/POINT-U5 KMB/POINT-U3, KMB/POINT-U5 13
MACHINE DIMENSION KMB/POINT-U6 14
MACHINE DIMENSION KMB/POINT-U7 TABLE SIZE 2700 750 TABLE SIZE 3300 750 3900 750 15
Cat No. 07.2007 Agent / Distributor KIHEUNG MACHINERY CO.LTD TEL: 042-933-5500~4 FAX: 042-933-5505 Web: http://www.kiheung.com E-mail: kiheung@kiheung.com mkchang@kiheung.com 43-1 Moon Pyung-Dong, Dae Deog-Ku, Taejeon, Korea TEL: 82-42-933-5500~4 FAX: 82-42-933-5505 Web: http://www.kiheung.com E-mail: kiheung@kiheung.com mkchang@kiheung.com TEL: 031-507-5500 FAX: 031-507-5501 E-mail : nurione@hanafos.com