02 High Productivity Turning Center

High Productivity Turning Center 03

Lynx 220 series Lynx 220A / C : 6000 / 4000 r/min Lynx 220MA[LMA] / MC[LMC] : 6000 / 4500 r/min Lynx 220LSA[LMSA] / LSC[LMSC] : 6000 / 4500 r/min Lynx 220A / C : ø 45 / 65 Lynx 220LSA[LMSA] : ø 51 / 34 (Main / Sub) Lynx 220LSC[LMSC] : ø 65 / 34 (Main / Sub) Lynx 220A[LA] / 220MA[LMA] 6000 r/min : 11 / 15 kw Lynx 220C[LC] 4000 r/min : 11 / 15 kw Lynx 220LSA[LMSA] 6000 r/min : 11/15 kw Lynx 220LSC[LMSC] 4500 r/min : 11/15 kw 04 High Productivity Turning Center

Sub Spindle (LSA / LSC / LMSA / LMSC) Subspindle PowerTorque diagram Lynx 220LSA (Sub) 6000 r/min : 3.7/5.5 kw 6000 r/min 360 (in 0.001 increment) BMT Turret (MA / MC / LMA / LMC / LMSA / LMSC) Rotary tool spindle PowerTorque diagram Lynx 220MA / MC / MA / LMA / LMC / LMSA / LMSC 0.15 s Lynx 220A / LA / LSA / LSC 12 st. Lynx 220MA / MC / LMA / LMC 12 st. (24 position index) Lynx 220C / LC 10 st. 05

0.07 µm (Ra) 0.30 µm 1.0 PRWProfile Leveled Filter ISO 11562(M1) Lc/Ls=300 Lc=0.800 90 0.0 [ ] 1.0 Assessment length 4.80 Vt=0.50 /s 180 0 Core machine Lynx 220 (Brass) 0.025 /rev 0.025 300 m/min Diamond (Nose R0.1) 270 s m/min m/rev Udrilling (ø30 ) 18.1 120 0.2 O.D. cutting (Rough) 9.2 200 0.45 O.D. cutting (Finish) 18.2 250 0.2 O.D. grooving1 (4 ) 3.5 140 0.2 O.D. grooving2 (8 ) 5.8 140 0.17 O.D. threading (M45 x P1.5) 10.4 201 1.5 Cutoff cutting (4 ) 15.1 120 0.1 Lynx 220 Lynx 220LS/LMS X 30 m/min Z 36 m/min 30 m/min 36 m/min B 30 m/min : Carbon steel, SM45C : ø 62 x 66 80.3 s 06 High Productivity Turning Center

Lynx 220ser 550, {330} Center Drilling 65 MT4 <Live center> 80 { } : Note) Tail Stock Lynx 220LA / LC / LMA / LMC Lynx 220A / C N.A Lynx 220MA / MC / LS / LMS N.A 320 cm 3 /min 4 Carbon steel, SM45C 200 m/min 0.4 /rev Chuck air (or coolant) blower Collet chuck Signal tower Tool presetter Work measurement 168 cm 3 /min Carbon steel, SM45C 80 m/min 0.28 /rev Oil skier Part catcher Chip conveyor Part conveyor 07

Lynx 220A / C [LA / LC] series Lynx 220MA / MC [LMA / LMC] : Opt 08 High Productivity Turning Center

Lynx 220LSA / LSC Lynx 220LMSA / LMSC 09

Lynx 220A / C series OD Tool Holder ID Tool Holder Extended OD Tool Holder Face Tool Holder Lynx 220M[LM] Single OD Tool Holder Single ID Tool Holder Double OD Holder Double ID Tool Holder [ ] : Long bed 10 High Productivity Turning Center

Lynx 220M[LM] Straight Rev. Tool Holder Angular Rev. Tool Head Face Tool Holder Lynx 220LSA[LSC] Single OD Tool Holder Single ID Tool Holder Double O.D Holder Double I.D Holder [ ] : Long bed 11

Lynx 220LMSA[LMSC] Single OD Tool Holder Single ID Tool Holder Lynx 220A / C series Double OD Holder Double ID Tool Holder [ ] : Long bed 12 High Productivity Turning Center

Lynx 220MA / MC / LMA / LMC Lynx 220LSA / LSC Lynx 220LMSA / LMSC 13

Lynx 220A / C [LA / LC] series Lynx 220MA / MC [LMA / LMC] Lynx 220LSA / LSC / LMSA / LMSC [ ] : Long bed 14 High Productivity Turning Center

* 1 Lynx 220A[LA] 170 322 42 (Rated capacity) r/min ASA deg r/min N. m kw s r/min m/min m/min m/min /rev /rev MT# kw kw kw kw kw kva kg 5000 A2 #5 90 53 12 25 x 25 ø 40 2325[2560] 2900[3100] Lynx 220C[LC] Lynx 220MA[LMA] Lynx 220MC[LMC] Lynx 220LSA 510 290 210 170 210 170 320 305 [525] 290 [510] 65 51 65 51 175 330 [550] 4000 A2 #6 110 76 10 [65] [MT#4] [80] 25.6 1600 6000 A2 #5 90 61 360 (0.001 ) 12 (24 position index) 20 x 20 ø32 * 2 / ø25 * 3 6000 3.7 2410[2630] 3700[4000] 4500 A2 #6 110 76 0.15 30 36 500 500 15 / 11 1.8 1.8 1655 6000 A2 #5 90 61 3300 380 525 12 25 x 25 Lynx 220LSC 210 65 4500 A2 #6 110 76 600 400 205 550 550 6000 ø110 flat 45 5.5/3.7 ø 40 / ø 20 30 1.2 23.7 2763 1627 3400 Lynx 220LMSA 170 51 6000 A2 #5 90 61 300 510 360 (0.001 ) 12 (24 position index) 20 x 20 6000 3.7 Lynx 220LMSC 210 65 4500 A2 #6 110 76 3500 (Lynx 220LA / LC / LMA / LMC) Automatic Door touch probe Bar Feeder interface Cooljet interface Chucking Parts catcher(65xl140) (65xL140) (Signal Tower) Tool Presetter (hydrauric type) Tool Presetter (manual type) (Sub) (Lynx 220A / C) * 1 :. 15

DOOSAN Fanuc i series Controlled axes X, Z (Lynx 220) X, Z, C (Lynx 220M / LM) X, Z, B (Lynx 220LSA / LSC) X, Z, C, A, B (Lynx 220LMSA / LMSC) Cs contouring control * Simultaneous controlled axes 3 axes (Lynx 220LSA / LSC) 4 axes (Lynx 220 / M / LM / LMSA / LMSC ) Axis control by PMC Backlash compensation for each rapid traverse and cutting feed Chamfering on / off Emergency stop Followup HRV2 control Inch / Metric conversion Increment system 1/10 0.0001 / 0.00001 /inch Interlock All axes / each axis Least input coand 0.001 / 0.0001 /inch Machine lock All axes / each axis Mirror image Overtravel Position switch Servo off Stored stroke check 1 Stored stroke check 2, 3 Torque control Unexpected disturbance torque detection function Stroke limit check before move Automatic operation (memory) Buffer register DNC operation (Reader / puncher interface is required) Dry run Handle incremental feed X1, X10, X100 Manual Handle interruption JOG feed Manual handle feed 1 unit Manual intervention and return Manual pulse generator 1 ea Manual reference position return MDI operation Program number search Program restart Sequence number search Single block Wrong operation prevention Reference position shift Refernce position setting without dog Nano interpolation 1st. reference position return Manual, G28 2nd. reference position return G30 3rd/4th. reference position return G30 Circular interpolation G02 Continuous threading Dwell (per sec) G04 High speed skip Linear interpolation G01 Multiple threading Positioning G00 Reference position return check G27 Thread cutting / Synchronous cutting Thread cutting retract Torque limit skip Variable lead threading Automatic acceleration / deceleration Cutting feedrate clamp Feed per minute Feed per revolution Feedrate override (10% unit) 0 200 % Jog feed override (10% unit) 0 2000 /min Manual per revolution feed Override cancel Rapid traverse override F0, 25, 100 % Rapid traverse rate Tangential speed constant control Spindle orientation Actual spindle speed output Auxiliary function lock Constant surface speed control High speed M/S/T interface M code function M3 digits Rigid tapping S code function S4 / S5 digits Spindle serial output S4 / S5 digits Spindle speed override 0 150 % Spindle Output switching Absolute / incremental prograing Addition of custom macro coon variables Automatic coordinate system setting Canned cycle for drilling / Turning Canned cycle Circular interpolation by R prograing Control in / out Coordinate system setting G50 Coordinate system shift Custom macro Decimal point prograing Pocket calculator type decimal point prograing Diameter / radius prograing (X axis) Direct drawing dimension prograing Direct of coordinate system shift G code system A / B / C Input unit 10 time multiply Label skip Manual absolute on and off Maximum program dimension ± 9 digit Multiple repetitive canned cycle G70 G76 Multiple repetitive canned cycle II Optional block skip 1 piece Parity check Pattern data input Plane selection G17, G18, G19 Program number O4 digit Program stop / end (M00, M01 / M02, M30) Prograable data input G10 Sequence number N5 digit SUB program call 10 folds nested Tape code : ISO / EIA auto recognition EIA RS422 / ISO840 Tape format for FANUC Series10/11 Work coordinate system G52 G59 Interruption type custom macro Work coordinate system preset Automatic tool offset Direct input of offset value measured Direct input of offset value measured B T code function T2 + 2 digits Tool geometry / wear compensation Tool life management Extended tool life management Tool nose radius compensation Tool offset G43, G44, G49 Tool offset 7 digits Tool offset pairs 64 pairs Tool offset value counter input Back ground editing Extended part program editing Memory card edit & operation Number of registered programs 400 ea Part program editing Part program storage length 1280 (512kB) m Play back Program protect Actual cutting feedrate display Alarm display Alarm history display Current position display Directory display and punch for each group Directory display of floppy cassette Display of spindle speed and T code at all screens External message display Help function Multi language display Operation history display Parameter setting and display Program name display 31 characters Run hours / parts count display Selfdiagnosis function Servo setting screen Spindle setting screen Status display Operating monitor screen Soft operator's panel Tool path graphic display External data input External key input External program input External program number search External work number search Memory card input / output Reader / puncher interface CH1.interface RS232C interface Automatic data backup Cycle start and lamp Display unit 8.4" Color LCD Feed hold and lamp NC and servo ready PCMCIA port in the front of LCD display unit PMC system0id Reset / rewind OPERATION GUIDANCE FUNCTION Manual Guide 0i INTERFACE FUNCTION Ethernet function Embedded ethernet AXIS CONTROL Controlled axes expansion (total) Max.4 axes Simultaneous controlled axes expansion (total) Max.4 axes FEED FUNCTION Advanced preview control INTERFACE FUNCTION Fast ethernet / Data server OPERATION Manual handle feed 2 units OTHERS 10.4" Color TFT LCD (Only Lynx 300 / 300M) Ez guide I (only with 10.4" color TFT LCD option) ROBOT INTERFACE Robot interface with PMC I/O module (Hardware between PMC I/O mudules) Robot interface with PROFIBUSDP Note : * : Lynx 220M / LM http://www.doosaninfracore.com/machinetools/ 1110ILK